Search Results

Search results for "28015"

3/4 Water solenoid valve 0.2-10 Bar normally closed triple 90 degree T90

3/4 plastic water washing machine triple solenoid valve WRAS approved T90\nFunction: 2/2 way normally closed\nOperation: Pressure assisted (Min 0.2 Bar pressure differential)\nPort: 3/4 BSP Male inlet with three 90 degree (right angle) 10.5mm hose tail outlets.\nPressure: 0.2 to 10 Bar \nOrifice: 11.0mm \nBody: Nylon white good grade GF\nCoil: R 6.2 Watts IP00 with faston tag Class F 60% duty rated (Max 2 Min power ON with 3 min power OFF for cooling)\nVoltage: 12vDC, 24vDC, 12vAC, 24vAC, 110vAC or 230vAC\nApprovals: WRAS, KTW and DM174 for drinking water production, transfer and storage, ACS health compliance certificate, ENEC European Norms Electrical Certification, CSV (European Union Aviation Safety Agency), MOCA FCM (Food Contact Materials), NSF food certification for public health protection and option for UL Underwriter Laboratories certified. \n\nThis is a very common RPE type R cold Water inlet Solenoid Valve for most domestic and commercial washing machine, dishwasher, drinking water dispensers and most other automated water control systems. Standard 3/4 BSP appliance hose fits directly onto the 3/4 BSP male thread.

7 in stock Model: T90

Coaxial 2/2 Pneumatic valve 0-64 Bar Brass Stainless 3/8 1/2 3/4 1 DN15

Coax air pilot valve 2 way 0-64 Bar DN15 RSG 28015\nFunction: 2/2 way normally closed, option normally open\nOperation: air pilot control 3 to 8 Bar 1/4 BSP and Namur interface\nPressure: 0 to 64 Bar (0 to 16 Bar reverse flow)\nOrifice: 15.0mm\nKv flow factor: 91 L/Min\nPort sizes: 3/8, 1/2, 3/4 or 1 BSP thread, option NPT or flange\nBody Brass, option stainless steel 303 or 316L\nInternals: stainless steel 316L\n\nMedia: Fluids under 500 CST and gases compatible with materials of construction.\nMedia temperature: -10°C to +100°C\n\nFluid Seals: FKM and PTFE, option EPDM.\n\nWater Seals: UHMW Polyethylene. Excellent wear and abrasion resistance. Very good lubricity in water based media. The special sharp-edged shape of the dynamic seal has a stripping effect on the piston/plunger that removes limescale + debris. Max +80°C\n\nGaseous Seals: Fluoroloy® A21. Excellent wear resistant material, low friction, broad chemical compatibility and provides perfect tightness performance with gaseous media. Max +80°C.\n\nOptions: normally closed 280A15, normally open 280B15, mounting brackets, inductive open and/or closed position switches with LED + 2mtr cable, oil and grease free, modular manifold systems and custom solutions.

0 in stock Model: 28015