Search Results

Search results for "ABVM06S"

3/4 BSP Motor ball valve WRAS 9-24vAC/DC or 110-240vAC Open/Close + Failsafe 10 Bar ABVM06S

3/4 inch Motor Actuated WRAS Ball Valve Mini series ABVM06S ®.\n\nMotor Actuator:\nOpen/Close: 4 to 6 seconds.\nIncludes: visual position indication.\nTemperature (ambient): -15°C to +50°C. \nCycle life: 100,000+ open/close, 100% rated.\nPower Consumption: 1 to 5 watts when moving.\nControl options: Failsafe return or Power Open/Close.\nPower supply: 9-24v 2 amp, 110-240v 500mA recommended.\nVoltage: 9 to 24 volts AC/DC or 110 to 240 volt AC with multi voltage technology.\n\nBall Valve: \nBore: 20.0mm\nPressure: 0 to 10 Bar\nBody: 304 stainless steel\nWRAS Certificate 2012107\nPort 3/4 BSP, optional NPT thread\nSeals: PTFE + EPDM (WRAS Approved).\nTemperature (media): -15°C to +100°C. \nMedia: air or water suitable with 304 stainless steel, EPDM + PTFE.\n\nOptions to choose.\n1. Failsafe Closed = Power ON will OPEN - Power OFF will automatically CLOSE with reserve power. (ABVM06S/9AR + ABVM06S/2AR)\n\n2. Failsafe Open = Power ON will CLOSE - Power OFF will automatically OPEN with reserve power. (ABVM06S/9AR-NO + ABVM06S/2AR-NO)\n\nFailsafe actuators require minimum 30 second power ON for recharging. \n\n3. Power Open/Close = connect RED +ve and BLACK -ve wires, GREEN wire is the control wire. \nPower to GREEN valve opens or power off valve closes. (ABVM06S/2 and ABVM06S/9)\n\n4. Control voltage 9 to 24v AC/DC or 110 to 240vAC.\n\nOther options.\n\nManual Override = Button Lift + Twist will open/close valve and disengage motor, push back down to re-engage motor. \nAvailable low voltage only. (ABVM06S/9AR-MO, ABVM06S/9AR-NO-MO, ABVM06S/9-MO)\n\nABVM Weather Cover (recommended for use outdoors or wet environments).\n\nE2 Position Switches = Position OPEN and CLOSED end of travel confirmation switches.\nVolt free feed back (no voltage supplied from actuator). \nSwitch rating 0 to 36vDC 0.4 Amp Max. (ABVM06S/9AR-E2, ABVM06S/2AR-E2, ABVM06S/9-E2, ABVM06S/2-E2) \n\nTechnical Specifications \n\nSpeed: \n9-24 volt: Open 4 second / close 4 seconds\n110-240 volt: Open 4 seconds / Close 6 seconds.\n\nStart Power\n9-24 volt: peak current can reach 2.08A for 5ms (0.005 seconds) after first start and capacitors not charged.\n\nMoving Power:\n9-24 volt: 1 to 1.2 Watts, 50mA to 130mA. (Back EMF 3 to 5 Volts over nominal. 9v=130mA, 12v=100mA, 24v=50mA.) \n110-240 volt: 2 to 5 Watts, 50 to 100mA. \n\nMaximum Voltage:\nActuators without manual override can operate from 6 to 24v AC/DC, where 24 volts is absolute maximum.\nActuators with manual override can operate from 9 to 35 volts AC/DC. \n\nDestruction Test.\nOn the 26th November 2020 at around 10.40am we connected an ABVM to a dry 1/2 BSP mini ball valve with 9-24vACDC failsafe closed actuator to our SVDT22 (digital cycle timer), and set this for 1 cycle every 60 seconds (30 sec power ON Open then 30 Sec power off to Close) 24/7 all day all night non-stop. (except holidays)\n\nAs of 31st May 2023 the valve has opened and closed, 1,311,280 times and still opening and closing perfectly.

2350 in stock Model: ABVM06S

3/4 BSP Motor Ball Valve WRAS 4-20mA, 0-10V or 0-5v Modulating 10 Bar ABVM06S/M9

3/4 inch Motor Actuated WRAS Approved Ball Valve Mini series ABVM06S/9M ®.\nActuator:\nCycle life: 100,000+ open/close\nPower: 2.25 to 5 Watts Max\nOpen or close time: 7 seconds\nProtection: IP67\nTemperature: -15°C to +50°C ambient.\nVoltage: 9 to 12 volt DC with multi voltage technology\nIncludes: visual position indication, position feedback + warning signal.\nModulating Input Control options: 4 to 20 mA, option 0-5vo or 0-10v\n\nBall Valve:\nWRAS approved certificate number 2010303\n3/4 BSP thread, option NPT thread\nBore: 20.0mm\nBody: 304 stainless steel\nPressure: 0 to 10 Bar\nSeals: PTFE + EPDM (WRAS Approved)\nTemperature: -15°C to +100°C. \nMedia: air or water etc suitable for materials of construction.\n\nControl options to choose:\n1. 4-20 milliamp control\nConnect Red +ve 9-24vDC,\nConnect Black -ve 9-24vDC and -ve 4-20mA\nGreen +ve Input control 4-20mA\nYellow status signal output 9-24vDC, NO voltage = all OK, 9-24v = Error.\nWhite +ve position feedback PWM pulse width modulation.\nOC output PWM signal is 100Hz, Duty cycle 5%-95%, Adjustable switch angle 0–90 degrees, Load 500mA. \n(optional 4-20mA)\n\n2. 0-5 volt control\nConnect Red +ve 9-24vDC,\nConnect Black -ve 9-24vDC and -ve 0-5v\nGreen +ve Input control 0-5 volt\nYellow status signal output 9-24vDC, NO voltage = all OK, 9-24v = Error.\nWhite +ve position feedback PWM pulse width modulation.\nOC output PWM signal is 100Hz, Duty cycle 5%-95%, Adjustable switch angle 0–90 degrees, Load 500mA. \n(optional 4-20mA)\n\n3. 0-10 volt control\nConnect Red +ve 9-24vDC,\nConnect Black -ve 9-24vDC and -ve 0-10v\nGreen +ve Input control 0-10 volt\nYellow status signal output 9-24vDC, NO voltage = all OK, 9-24v = Error.\nWhite +ve position feedback PWM pulse width modulation.\nOC output PWM signal is 100Hz, Duty cycle 5%-95%, Adjustable switch angle 0–90 degrees, Load 500mA. \n(optional 4-20mA)

90 in stock Model: ABVM06S/9M

3/4 BSP electric ball valve FKM 9-24vAC/DC or 110-240vAC Open/Close + Failsafe 10 Bar ABVM06SV

3/4 inch Motor Actuated Ball Valve Mini series ABVM06SV ®.\n\nMotor Actuator:\nOpen/Close: 4 to 6 seconds.\nIncludes: visual position indication.\nTemperature (ambient): -15°C to +50°C. \nCycle life: 100,000+ open/close, 100% rated.\nPower Consumption: 1 to 5 watts when moving.\nControl options: Failsafe return or Power Open/Close.\nPower supply: 9-24v 2 amp, 110-240v 500mA recommended.\nVoltage: 9 to 24 volts AC/DC or 110 to 240 volt AC with multi voltage technology.\n\nBall Valve:\nBore: 20.0mm\nPressure: 0 to 10 Bar\nBody: 304 stainless steel\nPort 3/4 BSP, optional NPT thread\nSeals: PTFE + FKM.\nTemperature (media): -15°C to +100°C.\nMedia: Fluid, oil + gases suitable with 304 stainless steel, FKM + PTFE.\n\nOptions to choose.\n1. Failsafe Closed = Power ON will OPEN - Power OFF will automatically CLOSE with reserve power. (ABVM06SV/9AR + ABVM06SV/2AR)\n\n2. Failsafe Open = Power ON will CLOSE - Power OFF will automatically OPEN with reserve power. (ABVM06SV/9AR-NO + ABVM06SV/2AR-NO)\n\nFailsafe actuators require minimum 30 second power ON for recharging.\n\n3. Power Open/Close = connect RED +ve and BLACK -ve wires, GREEN wire is the control wire.\nPower to GREEN valve opens or power off valve closes. (ABVM06SV/2 and ABVM06SV/9)\n\n4. Control voltage 9 to 24v AC/DC or 110 to 240vAC.\n\nOther options.\n\nManual Override = Button Lift + Twist will open/close valve and disengage motor, push back down to re-engage motor.\nAvailable low voltage only. (ABVM06SV/9AR-MO, ABVM06SV/9AR-NO-MO, ABVM06SV/9-MO)\n\nABVM Weather Cover (recommended for use outdoors or wet environments).\n\nE2 Position Switches = Position OPEN and CLOSED end of travel confirmation switches.\nVolt free feed back (no voltage supplied from actuator).\nSwitch rating 0 to 36vDC 0.4 Amp Max. (ABVM06SV/9AR-E2, ABVM06SV/2AR-E2, ABVM06SV/9-E2, ABVM06SV/2-E2)\n\nTechnical Specifications \n\nSpeed: \n9-24 volt: Open 4 second / close 4 seconds\n110-240 volt: Open 4 seconds / Close 6 seconds.\n\nStart Power\n9-24 volt: peak current can reach 2.08A for 5ms (0.005 seconds) after first start and capacitors not charged.\n\nMoving Power:\n9-24 volt: 1 to 1.2 Watts, 50mA to 130mA. (Back EMF 3 to 5 Volts over nominal. 9v=130mA, 12v=100mA, 24v=50mA.) \n110-240 volt: 2 to 5 Watts, 50 to 100mA. \n\nMaximum Voltage:\nActuators without manual override can operate from 6 to 24v AC/DC, where 24 volts is absolute maximum.\nActuators with manual override can operate from 9 to 35 volts AC/DC.

23 in stock Model: ABVM06SV

3/4 BSP Timer Control Motor Ball Valve WRAS 0-10 Bar TABVM06S

3/4 inch Time Controlled motor ball valve TABVM06S\n\nActuator:\nFully programable Set OPEN and CLOSE times between 99 hours 59 minutes 59 seconds, Initially starts as Valve timed Closed then timed Open, can change to Start Valve Open then timed close. \n\nOptions: \nAR (2 wire control) - Power off valve will Automatically Return to programmed start position via power from internal capacitor. \n\n3 wire control - Power off valve stays put, power on valve returns to programmed start position.\n\nVoltages: 9 to 24 volt AC/DC or 110 to 240 Volt AC.\nCycle life: 100,000 open/close\nPower: 5 Watts when moving \nOpen or close time: 5 seconds\nProtection: IP67\nTemperature: -15°C to +50°C ambient. \nVoltage: 9 to 24 volt AC/DC or 110 to 240 volt AC with multi voltage technology\nIncludes: visual position indication and LED screen.\n\nBall Valve:\n3/4 BSP thread, option NPT thread\nBore: 20.0mm \nBody: 304 stainless steel\nPressure: 0 to 10 Bar\nSeals: PTFE + EPDM (WRAS Approved)\nTemperature: -15°C to +100°C. \nMedia: air or water etc suitable for materials of construction.\n\nSet Valve Open Time:\nPress and hold SET button for 5 seconds displays t On valve open time\n\nPress middle button to select change 10 hour increment, increase with right button\nPress middle button to select change 1 hour increment, increase with right button\nPress middle button to select change 10 minute increment, increase with right button\nPress middle button to select change 1 minute increment, increase with right button\nPress middle button to select change 10 second increment, increase with right button\nPress middle button to select change 1 second increment, increase with right button\n\nSet Valve Closed Time:\nPress and hold SET button for 5 seconds displays t OFF valve closed time\n\nPress middle button to change 10 hour increment with right button\nPress middle button to change 1 hour increment with right button\nPress middle button to change 10 minute increment with right button\nPress middle button to change 1 minute increment with right button\nPress middle button to change 10 second increment with right button\nPress middle button to change 1 second increment with right button\nTo set open press button set button until t On displayed\n\nChange Valve Start Position: Valve Closed or Valve Open\nPress SET button for 5 seconds\n\nPress set button through menu t On, t OFF, Pons is displayed (Position Start)\nPress right button to Change \nStart On (Valve start Open then timed close) \nOR \nStart OFF (Valve start Closed then timed open)

5 in stock Model: TABVM06S