Search Results

Search results for "LADS8150"

1/4 Stainless Solenoid Valve 0-42 Bar 2/2 Latching 1.2-5mm

1/4 inch stainless latching solenoid valve CS Fluid Power LADS8000.\nFunction: 2/2 way latching bistable\nOperation: direct acting\nBody: 316 stainless steel\nInternals: Stainless steel\nShading ring: without\nPort: 1/4 BSP, option NPT thread.\nOrifice: 1.2mm, 1.6mm, 2mm, 3mm, 4mm, 5mm\nKv flow factor: 1.0 to 9.2 Min according to orifice, based on water with 1 Bar pressure difference. \nPressure: vacuum 10-6 Torr to 42 Bar (depending on coil power and orifice size)\nSeals: NBR standard, option FKM, VST, EPDM, Silicone, PTFE, Neoprene, Hypalon, ECO and HNBR.\nMedia: air, water, light oil, vacuum 10-6 Torr and most slighty aggressive fluids under 50CST and gases compatible with materials of construction.\nCoil: WPG1 12 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.\nCoil: WPG2 18 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.\nProtection: IP65 with LED connector (included)\nVoltages: 12vDC or 24vDC\n\nLADS8000 Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again swap the live and neutral wires back to original position and repeat the process.

1 in stock Model: LADS8000