Search Results

Search results for "VMR62"

2 Gas Solenoid Valve EN161 0-200mBar Auto Reset Elektrogas VMR62

2 inch Gas Solenoid Valve EN161 Elektrogas VMR62\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 2 BSP thread, Option NPT thread (N)\nPressure: 0 to 200 millibar, options 500 millibar or 6 Bar\nMedia: Air and Natural Gas, option (J) Biogas and (K) Coke oven gas (COG)\nCertified: EN161 Class A Group 2 and CE registration 0063AQ1350 by GASTEC, SIL3 to IEC EN 61508 by Intercert certificate no. C-IT.AB86.B.04357 \nKvs flow factor: 40.0 m3/hr, equipped with flow rate adjustment\nBody: Aluminium\nSeals: NBR based rubber certified for gas (EN549)\nOpen/close time: <1 second \nTemperature: -15°C to +60°C\nMesh filter: 600 µm protects valve seat, disc and downstream components\nGauge ports: 1/4 BSP pressure gauge ports on two sides of the inlet chamber, to connect pressure gauges, pressure switches, leakage tester or other gas equipment.\nProof of closure: 1/8BSP base port to accept PCS switch fitted as standard to all 230vAC models that we stock.\nVoltage: 230vAC standard, option for 12vDC, 24vDC, 24vAC and 110vAC\nCoil: IP54 EN60529 with terminal box M20x1.5 (EN50262) and PG9 cable gland to avoid water and dirty contamination.\nElectrical safety: Class I (EN 60335-1)\nCoil: Insulation Class H 200°C, thermal resistance Class F 155°C\nVoltage tolerance: -15% to +10%\n\nCoil option: Low power coil (L), ATEX Ex-proof Zones 2 and 22, according to 94/9/EC Directive, Category II 3 G, D protection Ex n A II T4 X, Ex tD A 22 IP54 T135 X \n\nOption: Proof of closure switch (P): Mechanical closed position electrical switch PCS6.\n\nValves are 100% tested by computerised testing and are fully warranted.\n\nAll components are designed to withstand any mechanical, chemical and thermal condition occurring during typical service. Effective impregnation and surface treatments have been used to improve mechanical reliability , sealing and corrosion resistance. \n\nThe VMR62 is an auto reset fast opening single-stage solenoid valve for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and others gas consuming equipment. \n\nVMR1930.1415 230vAC High power coil for VMR352 + VMR62 6 Bar version\nVMR1930.1416 230vAC coil for VMR352, VMR42 + VMR62 \nVMR1930.1452 24vAC/DC coil for VMR352, VMR42 + VMR62

11 in stock Model: VMR62