Search Results

Search results for "35"

Nass Magnet Coil Core 14.6mm, H 42mm, W 30mm, L 39mm 12v to 380v

Nass Magnet Solenoid Valve Coil System 13/30\nBore: 14.6mm, top plate 10mm\nHeight: 42mm\nWidth: 30mm\nLength: 39mm\nED 100%, Class H, protection according to EN 60529 IP65 with connector.\nConnection: according to: DIN EN 175301803-A\nMaterial: Thermoset resin\nVoltage tolerance: -10% to +10%\nAmbient Temperature: -20°C +50°C\n\nVoltages:\n12vAC 50/60Hz (113-030-0044 or use 12vdc with bridge rectifier connector)\n12vDC 15 Watt 9.7Ω, (113-030-0047, previously 2506442)\n24vAC 19.3VA 6.2 Ω, (113-030-0040, previously 0543 00.1-00/5768, 25002865)\n24vDC 15 Watt 37.8 Ω, (113-030-0028, previously 0543 00.1-00/5753, 2503154).\n48vAC 50/60Hz 19VA 24.3 Ω, (113-030-0052, previously 2507966)\n48vDC 10.9 Watts 20.5 Ω, (113-028-0044)\n64vAC 37.8 Ω\n110vAC 50/60Hz 17.6VA 135 Ω (113-030-0037, Previously 054300.1-00/6869, 2502864)\n110vDC 17 Watts 69 Ω, (113-030-0053, previously 25010353)\n220vDC 18 Watt 338 Ω, (113-030-0051)\n240vAC 50/60Hz, 17.6VA 701 Ω, (113-030-0203)\n380vAC 22VA 2002 Ω, (previously 0543 00.1-00/6755, 25007935)\n\nFits all Shako solenoid 2/2 way 3/8 to 2\" valves: PU220A, PU225A, PU225D, PU225DN, PU225S, PU225H, PU225X, SPU220 and SPU225 series

6281 in stock Model: 22003

1/2 BSP Motor ball valve WRAS 9-24vAC/DC or 110-240vAC Open/Close + Failsafe 10 Bar ABVM04S

1/2 inch Motor Actuated WRAS Ball Valve Mini series ABVM04S ®.\n\nMotor Actuator:\nOpen/Close: 4 to 6 seconds.\nIncludes: visual position indication.\nTemperature (ambient): -15°C to +50°C. \nCycle life: 100,000+ open/close, 100% rated.\nPower Consumption: 1 to 5 watts when moving.\nControl options: Failsafe return or Power Open/Close.\nPower supply: 9-24v 2 amp, 110-240v 500mA recommended.\nVoltage: 9 to 24 volts AC/DC or 110 to 240 volt AC with multi voltage technology.\n\nBall Valve: \nBore: 15.0mm\nPressure: 0 to 10 Bar\nBody: 304 stainless steel\nWRAS Certificate 2012107\nPort 1/2 BSP, optional NPT thread\nSeals: PTFE + EPDM (WRAS Approved).\nTemperature (media): -15°C to +100°C. \nMedia: air or water suitable with 304 stainless steel, EPDM + PTFE.\n\nOptions to choose.\n1. Failsafe Closed = Power ON will OPEN - Power OFF will automatically CLOSE with reserve power. (ABVM04S/9AR + ABVM04S/2AR)\n\n2. Failsafe Open = Power ON will CLOSE - Power OFF will automatically OPEN with reserve power. (ABVM04S/9AR-NO + ABVM04S/2AR-NO)\n\nFailsafe actuators require minimum 30 second power ON for recharging. \n\n3. Power Open/Close = connect RED +ve and BLACK -ve wires, GREEN wire is the control wire. \nPower to GREEN valve opens or power off valve closes. (ABVM04S/2 and ABVM04S/9)\n\n4. Control voltage 9 to 24v AC/DC or 110 to 240vAC.\n\nOther options.\n\nManual Override = Button Lift + Twist will open/close valve and disengage motor, push back down to re-engage motor. \nAvailable low voltage only. (ABVM04S/9AR-MO, ABVM04S/9AR-NO-MO, ABVM04S/9-MO)\n\nABVM Weather Cover (recommended for use outdoors or wet environments).\n\nE2 Position Switches = Position OPEN and CLOSED end of travel confirmation switches.\nVolt free feed back (no voltage supplied from actuator). \nSwitch rating 0 to 36vDC 0.4 Amp Max. (ABVM04S/9AR-E2, ABVM04S/2AR-E2, ABVM04S/9-E2, ABVM04S/2-E2) \n\nTechnical Specifications \n\nSpeed: \n9-24 volt: Open 4 second / close 4 seconds\n110-240 volt: Open 4 seconds / Close 6 seconds.\n\nStart Power\n9-24 volt: peak current can reach 2.08A for 5ms (0.005 seconds) after first start and capacitors not charged.\n\nMoving Power:\n9-24 volt: 1 to 1.2 Watts, 50mA to 130mA. (Back EMF 3 to 5 Volts over nominal. 9v=130mA, 12v=100mA, 24v=50mA.) \n110-240 volt: 2 to 5 Watts, 50 to 100mA. \n\nMaximum Voltage:\nActuators without manual override can operate from 6 to 24v AC/DC, where 24 volts is absolute maximum.\nActuators with manual override can operate from 9 to 35 volts AC/DC. \n\nDestruction Test.\nOn the 26th November 2020 at around 10.40am we connected an ABVM to a dry 1/2 BSP mini ball valve with 9-24vACDC failsafe closed actuator to our SVDT22 (digital cycle timer), and set this for 1 cycle every 60 seconds (30 sec power ON Open then 30 Sec power off to Close) 24/7 all day all night non-stop. (except holidays)\n\nAs of 31st May 2023 the valve has opened and closed, 1,311,280 times and still opening and closing perfectly.

2180 in stock Model: ABVM04S

Solenoid Coil Core 14.6mm, H 42mm, W 36mm, L 45mm 12 to 230v

24vDC Solenoid Valve Coil Nass Magnet 36mm width\n\nSystem: 13/36 Power Level 5 Class H 180°C\nConnection type: according to DIN EN 175301-803-A, DIN43650A IP65\nMoulding: thermoset resin\nVoltage tolerance: -10% to +10%\nTemperature: -20 °C +50 °C ambient \nRelative duty cycle: 100% \nThermal class: according to DIN VDE 0580 Class H\nProtection: EN 60529 IP65 with connector.\n\nVoltages: \n12vDC/ 36vAC 17.1 / 25VA 8.4 Ω (dual voltage) (113-030-0120)\n24vAC 25VA 4.1 Ω (113-030-0127, previously 0545 00.1-00/5810)\n24vDC 18.5 Watts 30.9 Ω (113-030-0132)\n110vAC 25VA 70.4 Ω (113-030-0137)\n110vDC 17.1 Watts 675 Ω (113-030-0136)\n230vAC 25VA 362 Ω (113-030-0138)\n220vDC 18 Watts 2550 Ω 0545 00.1-00/5889\n\nFits PU220D, PU220A, NOPU220, NOPK and PK series solenoid valves.\n\nCustoms tariff number: 84819000

1641 in stock Model: 22005

1/4 Brass Solenoid Valve 0-150 Bar 2/2 Normally Closed 1.2-5mm

1/4 inch Miniature brass solenoid valve CS Fluid Power AD8000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSP standard, option NPT or Rc thread.\nPressure: 0 to 150 Bar (depending on orifice and coil power level)\nVacuum: Torr 10-6 Max\nBody: Brass\nInternals: stainless steel\nOrifice: 1.2 mm, 1.6 mm, 2 mm, 3 mm, 4 mm or 5 mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR or Hypalon. (PTFE must be used for pressures over 30 Bar).\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option available AD80**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC. \nOther options: Manual Over Ride and other custom made options.

1572 in stock Model: AD8000

1/4 Brass Solenoid Valve 0-8.5Bar 2/2 Normally Closed 2.3mm PU220AR-02

1/4 Brass solenoid valve Shako PU220AR-02 ®\nFunction: 2/2 way normally closed \nOperation: direct acting\nPort: 1/4 BSP, option NPT thread\nPressure: 0 to 8.5 Bar (AC) or 0 to 7 Bar (DC Voltage)\nBody: Brass\nInternals: stainless steel\nSeals: NBR standard, option FKM, EPDM or HNBR\nMedia: air, water, vacuum, light oils and any other gases and fluids under 40CST that are compatible with the materials of construction.\nOrifice: 2.3mm\nKv flow factor: 2.0 L/Min based on water with 1 Bar pressure drop.\nCoil: low power 4.5 watt IP65 Class F DIN43650B 100% duty rated\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22. \nVoltages: 6vDC, 12vDC, 24vDC, 48vDC, 110vDC and 12vAC, 24vAC, 48vAC, 110vAC and 230vAC.\nIncludes M4x0.8 mounting holes

1355 in stock Model: PU22002AR