Search Results

Search results for "6116"

1/8 Stainless Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm

1/8 inch Miniature stainless solenoid valve CS Fluid Power ADS6000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/8 BSP standard, option NPT or Rc thread.\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: copper, option silver\nPressure: 0 to 150 Bar AC voltage, 0 to 105 Bar DC voltage (PTFE seals required for pressure above 30 Bar)\nTemperature: -10 to +180°C Max\nVacuum: Torr 10-6 Max\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM, Option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon, Butyl IIR. PTFE must be used for pressure over 30 Bar.\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option ADS60**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.\nOther options: Manual Over Ride, Silver shading ring, degreased and other custom made options.

131 in stock Model: ADS6000

1/8 Brass Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm

1/8 inch Miniature brass solenoid valve CS Fluid Power AD6000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/8 BSP standard, option NPT or Rc thread.\nBody: Brass\nInternals: stainless steel\nPressure: 0 to 150 Bar (PTFE seals required for pressures over 30 Bar)\nVacuum: Torr 10-6 Max\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR or Hypalon. (PTFE must be used for pressures over 30 Bar).\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67, Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67, Class H 100% duty rated\nCoil option AD60**: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC. \nOther options: Manual Over Ride and other custom made options.

96 in stock Model: AD6000

3/4 Water solenoid valve 0.2-10 Bar normally closed double 180 degree D180

3/4 plastic water washing machine double solenoid valve WRAS approved D180\nFunction: 2/2 way normally closed\nOperation: Pressure assisted (Min 0.2 Bar pressure differential)\nPort: 3/4 BSP Male inlet with twin 180 degree (straight) single 10.5mm or 12.5mm hose tail outlets.\nPressure: 0.2 to 10 Bar \nOrifice: 11.0mm \nBody: Nylon white good grade GF\nCoil: R 6.2 Watts IP00 with faston tag Class F 60% duty rated (Max 2 Min power ON with 3 min power OFF for cooling)\nVoltage: 12vDC, 24vDC, 12vAC, 24vAC, 110vAC or 230vAC\nApprovals: WRAS, KTW and DM174 for drinking water production, transfer and storage, ACS health compliance certificate, ENEC European Norms Electrical Certification, CSV (European Union Aviation Safety Agency), UL Underwriter Laboratories certified, MOCA FCM (Food Contact Materials), NSF food certification for public health protection. \n\nThis is a very common RPE type R cold Water inlet Solenoid Valve for most domestic and commercial washing machine, dishwasher, drinking water dispensers and most other automated water control systems. Standard 3/4 BSP appliance hose fits directly onto the 3/4 BSP male thread.

38 in stock Model: D180

1/8 Brass Solenoid Valve 0-42 Bar 2/2 Latching 1.2-5mm

1/8 inch Brass latching / bi-stable solenoid valve CS Fluid Power LAD6000.\nFunction: 2/2 way latching bistable\nOperation: direct acting\nBody: Brass\nInternals: Stainless steel\nShading ring: without\nPort: 1/8 BSP, option NPT thread.\nOrifice: 1.2mm, 1.6mm, 2mm, 3mm, 4mm, 5mm\nKv flow factor: 1.0 to 9.2 L/min according to orifice.\nPressure: full vacuum to 42 Bar (depending on coil power and orifice size)\nSeals: NBR standard, option FKM, VST, EPDM, Silicone, PTFE, Neoprene, Hypalon, ECO and HNBR.\nMedia: air, water, light oil, vacuum 10-6 Torr and most fluids under 50CST and gases compatible with materials of construction.\nCoil: WPG1 12 Watt IP67 DIN43650A UL CSA and CE approved.\nCoil: WPG2 18 Watt IP67 DIN43650A UL CSA and CE approved.\nProtection: IP65 with LED connector (included)\nVoltages: 12vDC or 24vDC\n\nLAD6000 Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again swap the live and neutral wires back to original position and repeat the process.

1 in stock Model: LAD6000

1/8 Stainless Solenoid Valve 0-42 Bar 2/2 Latching 1.2-5mm

1/8 inch stainless latching / bi-stable solenoid valve CS Fluid Power LADS6000.\nFunction: 2/2 way latching bistable\nOperation: direct acting\nBody: 316 stainless steel\nInternals: Stainless steel\nShading ring: without\nPort: 1/8 BSP, option NPT thread.\nOrifice: 1.2mm, 1.6mm, 2mm, 3mm, 4mm, 5mm\nKv flow factor: 1.0 to 9.2 Min according to orifice, based on water with 1 Bar pressure difference. \nPressure: vacuum 10-6 Torr to 42 Bar (depending on coil power and orifice size)\nSeals: NBR standard, option FKM, VST, EPDM, Silicone, PTFE, Neoprene, Hypalon, ECO and HNBR.\nMedia: air, water, light oil, vacuum 10-6 Torr and most slighty aggressive fluids under 50CST and gases compatible with materials of construction.\nCoil: WPG1 12 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.\nCoil: WPG2 18 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.\nProtection: IP65 with LED connector (included)\nVoltages: 12vDC or 24vDC\n\nLADS6000 Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again swap the live and neutral wires back to original position and repeat the process.

1 in stock Model: LADS6000