Search Results

Search results for "6130"

1/8 Stainless Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm

1/8 inch Miniature stainless solenoid valve CS Fluid Power ADS6000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/8 BSP standard, option NPT or Rc thread.\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: copper, option silver\nPressure: 0 to 150 Bar AC voltage, 0 to 105 Bar DC voltage (PTFE seals required for pressure above 30 Bar)\nTemperature: -10 to +180°C Max\nVacuum: Torr 10-6 Max\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM, Option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon, Butyl IIR. PTFE must be used for pressure over 30 Bar.\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option ADS60**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.\nOther options: Manual Over Ride, Silver shading ring, degreased and other custom made options.

131 in stock Model: ADS6000

1/8 Brass Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm

1/8 inch Miniature brass solenoid valve CS Fluid Power AD6000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/8 BSP standard, option NPT or Rc thread.\nBody: Brass\nInternals: stainless steel\nPressure: 0 to 150 Bar (PTFE seals required for pressures over 30 Bar)\nVacuum: Torr 10-6 Max\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR or Hypalon. (PTFE must be used for pressures over 30 Bar).\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67, Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67, Class H 100% duty rated\nCoil option AD60**: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC. \nOther options: Manual Over Ride and other custom made options.

96 in stock Model: AD6000

3/4 Steam Solenoid Valve 0.5-20 Bar 2/2 Normally Closed

3/4 inch Steam solenoid valve CS Fluid Power Model SA20 (NSA20).\nFunction: 2/2 way Normally Closed\nOperation: Pressure assisted (Requires min 0.5 bar pressure difference)\nPort: 3/4 BSPP, option NPT or Rc thread.\nPressure: 0.5 to 12 Bar Steam, 0.5 to 20 Bar air / water\nBody: Brass\nInternals: Stainless steel.\nSeals: PTFE Graphite impregnated.\nMedia Temperature: +180°C steam, +200°C heavy oil Max \nMedia: air, water, steam, light oil and most other fluids under 50 CST and gases compatible with materials of construction.\nOrifice: 20.0mm\nKv flow factor: 133 L/min based on water with 1 Bar pressure difference.\nCoil: WPG2 18 Watt UL; CSA; CE and IP67 approved DIN43650A Class H 100% duty rated.\nProtection: IP65 with LED connector (Included)\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22. Pressure range 0.5 to 10 Bar (special request 0.5 to 20 Bar) max media temperature +80°C\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC, 230vAC or 380vAC.\n\nThe NSA20 is very robust well designed high flow highly reliable steam piston operated solenoid valve being one of the best quality steam valves available in the market today and the ideal choice as a quality long term high pressure and high temperature open and close solenoid valve solution.

51 in stock Model: SA20

1 Steam Solenoid Valve 0.5-20 Bar 2/2 Normally Closed

1 inch Steam solenoid valve CS Fluid Power Model SA25 (NSA25).\nFunction: 2/2 way Normally Closed\nOperation: Pressure assisted (Requires min 0.5 bar pressure difference)\nPort: 1 BSPP, option NPT or Rc thread.\nPressure: 0.5 to 12 Bar Steam, 0.5 to 20 Bar air / water\nBody: Brass\nInternals: Stainless steel.\nSeals: PTFE Graphite impregnated.\nMedia Temperature: +180°C steam, +200°C heavy oil Max \nMedia: air, water, steam, light oil and most other fluids under 50 CST and gases compatible with materials of construction.\nOrifice: 25.0mm\nKv flow factor: 188.8 L/min based on water with 1 Bar pressure difference.\nCoil: WPG2 18 Watt UL; CSA; CE and IP67 approved DIN43650A Class H 100% duty rated.\nProtection: IP65 with LED connector (Included)\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22. Pressure range 0.5 to 10 Bar (special request 0.5 to 20 Bar) max media temperature +80°C\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC, 230vAC or 380vAC.\n\nThe NSA25 is very robust well designed high flow highly reliable steam piston operated solenoid valve being one of the best quality steam valves available in the market today and the ideal choice as a quality long term high pressure and high temperature open and close solenoid valve solution.

46 in stock Model: SA25

1/2 Steam Solenoid Valve 0.5-20 Bar 2/2 Normally Closed

1/2 inch Steam solenoid valve CS Fluid Power Model SA15 (NSA15).\nFunction: 2/2 way Normally Closed\nOperation: Pressure assisted (Requires min 0.5 bar pressure difference)\nPort: 1/2 BSPP, option NPT or Rc thread.\nPressure: 0.5 to 12 Bar Steam, 0.5 to 20 Bar air / water\nBody: Brass\nInternals: Stainless steel.\nSeals: PTFE Graphite impregnated.\nMedia Temperature: +180°C steam, +200°C heavy oil Max \nMedia: air, water, steam, light oil and most other fluids under 50 CST and gases compatible with materials of construction.\nOrifice: 15.0mm\nKv flow factor: 64.35 L/min based on water with 1 Bar pressure difference.\nCoil: WPG2 18 Watt UL; CSA; CE and IP67 approved DIN43650A Class H 100% duty rated.\nProtection: IP65 with LED connector (Included)\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22. Pressure range 0.5 to 10 Bar (special request 0.5 to 20 Bar) max media temperature +80°C\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC, 230vAC or 380vAC.\n\nThe NSA15 is very robust well designed high flow highly reliable steam piston operated solenoid valve being one of the best quality steam valves available in the market today and the ideal choice as a quality long term high pressure and high temperature open and close solenoid valve solution.

46 in stock Model: SA15