Search Results

Search results for "6216"

Solenoid Coil Core 14.6mm, H 42mm, W 36mm, L 45mm 12 to 230v

24vDC Solenoid Valve Coil Nass Magnet 36mm width\n\nSystem: 13/36 Power Level 5 Class H 180°C\nConnection type: according to DIN EN 175301-803-A, DIN43650A IP65\nMoulding: thermoset resin\nVoltage tolerance: -10% to +10%\nTemperature: -20 °C +50 °C ambient \nRelative duty cycle: 100% \nThermal class: according to DIN VDE 0580 Class H\nProtection: EN 60529 IP65 with connector.\n\nVoltages: \n12vDC/ 36vAC 17.1 / 25VA 8.4 Ω (dual voltage) (113-030-0120)\n24vAC 25VA 4.1 Ω (113-030-0127, previously 0545 00.1-00/5810)\n24vDC 18.5 Watts 30.9 Ω (113-030-0132)\n110vAC 25VA 70.4 Ω (113-030-0137)\n110vDC 17.1 Watts 675 Ω (113-030-0136)\n230vAC 25VA 362 Ω (113-030-0138)\n220vDC 18 Watts 2550 Ω 0545 00.1-00/5889\n\nFits PU220D, PU220A, NOPU220, NOPK and PK series solenoid valves.\n\nCustoms tariff number: 84819000

1641 in stock Model: 22005

1/8 Stainless Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm

1/8 inch Miniature stainless solenoid valve CS Fluid Power ADS6000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/8 BSP standard, option NPT or Rc thread.\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: copper, option silver\nPressure: 0 to 150 Bar AC voltage, 0 to 105 Bar DC voltage (PTFE seals required for pressure above 30 Bar)\nTemperature: -10 to +180°C Max\nVacuum: Torr 10-6 Max\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM, Option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon, Butyl IIR. PTFE must be used for pressure over 30 Bar.\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option ADS60**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.\nOther options: Manual Over Ride, Silver shading ring, degreased and other custom made options.

131 in stock Model: ADS6000

1/8 Brass Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm

1/8 inch Miniature brass solenoid valve CS Fluid Power AD6000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/8 BSP standard, option NPT or Rc thread.\nBody: Brass\nInternals: stainless steel\nPressure: 0 to 150 Bar (PTFE seals required for pressures over 30 Bar)\nVacuum: Torr 10-6 Max\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR or Hypalon. (PTFE must be used for pressures over 30 Bar).\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67, Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67, Class H 100% duty rated\nCoil option AD60**: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC. \nOther options: Manual Over Ride and other custom made options.

96 in stock Model: AD6000