Search Results

Search results for "8020"

1/4 Brass Solenoid Valve 0-150 Bar 2/2 Normally Closed 1.2-5mm

1/4 inch Miniature brass solenoid valve CS Fluid Power AD8000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSP standard, option NPT or Rc thread.\nPressure: 0 to 150 Bar (depending on orifice and coil power level)\nVacuum: Torr 10-6 Max\nBody: Brass\nInternals: stainless steel\nOrifice: 1.2 mm, 1.6 mm, 2 mm, 3 mm, 4 mm or 5 mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR or Hypalon. (PTFE must be used for pressures over 30 Bar).\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option available AD80**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC. \nOther options: Manual Over Ride and other custom made options.

1572 in stock Model: AD8000

1/4 Stainless Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm (ATEX option)

1/4 inch Miniature stainless solenoid valve CS Fluid Power ADS8000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSP standard, option NPT or Rc thread.\nBody: 316 stainless steel\nInternals: stainless steel\nPressure: 0 to 150 Bar (PTFE seals required for pressure 30 Bar or more)\nVacuum: Torr 10-6 Max\nTemperature: +180°C Max according to seals\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, Option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon, Butyl IIR. PTFE must be used for pressures over 30 Bar.\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option ADS80**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.\nOther options: Manual Over Ride, Silver shading ring, degreased and other custom made options.

239 in stock Model: ADS8000

1/8 1/4" 3/2 Air solenoid valve single acting 1.5-10Bar 22mm wide BM320 (ATEX option)

1/8 1/4 inch 3/2 way solenoid valve single acting BM320\nFunction: 3/2 way normally closed BM320, option 3/2 normally open BM320N\nOperation: internal pilot\nPort: 1/8 or 1/4 BSP thread, option NPT or Rc\nWidth: 18mm or 22mm (according to port size)\nPressure: 1.5 to 8 Bar, Max working 10 Bar\nOrifice: 12mm² or 16mm² (according to port size)\nCycle time: Open and close 80 mSec.\nManual override: included push or twist and lock\nTemperature: -10°C to +50°C\nBody: Aluminium alloy\nSeals: NBR\nMedia: Compressed air and inert gases\nCoil 1/8 port: 2.5 Watt IP65 Class F 100% duty rated DIN C, option with LED or coil with 30cm flying lead wire.\nCoil 1/4 port: 4.5 Watt IP65 Class F 100% duty rated DIN 43650B, option with 30cm flying lead wire.\nVoltages: 12vDC, 24vDC, 24vAC, 110vAC or 230vAC\nOption 1/4 port: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.

31 in stock Model: BW320, BM320

1/4-1/2" 3/2 Air solenoid valve single acting 2-10 Bar PU322 (ATEX option)

3/2 way solenoid valve single acting Shako PU322\nFunction: 3/2 way normally closed with manual override, option normally open\nOperation: internal pilot\nPort: 1/4, 3/8 or 1/2 BSP thread, option NPT or Rc \nWidth: 26mm, 30mm or 34mm according to port size\nPressure: 2 to 8 Bar, Max working 10 Bar\nOrifice: 18mm², 35mm² or 70mm² according to port size\nTemperature: -10°C to +50°C\nBody: Aluminium alloy\nSeals: NBR\nMedia: Compressed air and inert gases\nCoil: 4.5 Watt IP65 Class F 100% duty rated DIN 43650B, option with 30cm flying lead wire.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 12vAC, 24vAC, 48vAC, 110vAC or 230vAC\nOption: ATEX EExmIIT4 for hazardous area zones 21 and 22.\nWeight: 280g, 450g or 685g according to port size.\n\nFor manifold to suit, see MF520 in related items and select correct size option

20 in stock Model: PU322

1/8 1/4 Stainless Solenoid Valve 0-10 Bar 2/2 Normally Open 1.6-2.4mm

1/8 1/4 normally open stainless steel solenoid valve JAX\nFunction: 2/2 way normally open\nPort: 1/8 or 1/4 BSP, option NPT thread\nOperation: Direct Acting\nBody: AISI303 stainless steel\nInternals: stainless steel\nOrifice: 1.6mm or 2.4mm\nPressure: (1.6mm) 0 to 10 Bar (AC) or 0 to 7 Bar (DC Voltage)\nPressure: (2.4mm) 0 to 7 Bar (AC) or 0 to 5 Bar (DC Voltage)\nSeals: FKM standard optional NBR or EPDM\nMedia: air, water, light oil, vacuum and other slightly aggressive media compatible with materials of construction.\nCoil: 31400 IP65 DIN43650A Class F 100% duty rated 14-20 Watt or 26-48VA\nProtection: IP65 with connector (Included)\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC or 12vAC, 24vAC, 48vAC, 110vAC or 230vAC

19 in stock Model: JAX