Search Results

Search results for "6016"

1/4 Brass Solenoid Valve 0-150 Bar 2/2 Normally Closed 1.2-5mm

1/4 inch Miniature brass solenoid valve CS Fluid Power AD8000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSP standard, option NPT or Rc thread.\nPressure: 0 to 150 Bar (depending on orifice and coil power level)\nVacuum: Torr 10-6 Max\nBody: Brass\nInternals: stainless steel\nOrifice: 1.2 mm, 1.6 mm, 2 mm, 3 mm, 4 mm or 5 mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR or Hypalon. (PTFE must be used for pressures over 30 Bar).\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option available AD80**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC. \nOther options: Manual Over Ride and other custom made options.

1572 in stock Model: AD8000

1/2 Brass Solenoid Valve 0.5-15 Bar 2/2 Normally Closed PU225A-04 (ATEX option)

1/2 inch Brass solenoid valve Model PU225A-04 ®\nFunction: 2/2 way normally closed\nOperation: pressure assisted (requires 0.5 Bar min pressure differential)\nPressure: 0.5 to 10 Bar differential, Max working 15 Bar\nPort: 1/2 BSP, option NPT thread\nOrifice: 13.0mm\nKv flow factor: 40 L/min based on water with 1 Bar pressure drop\nBody: Brass\nInternals: Stainless steel\nSealing: NBR standard optional EPDM, Viton and HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nOption: degreased, with all traces of oil and grease removed.\nTemperature: -15°C to +80°C with NBR seals, option Viton -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C.\nCoil option: 22003L Latching coil 6 to 12vDC, power pulse stays open, reverse polarity power pulse will stay closed.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nHS code 84818030

584 in stock Model: PU22504

1/8 Stainless Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm

1/8 inch Miniature stainless solenoid valve CS Fluid Power ADS6000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/8 BSP standard, option NPT or Rc thread.\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: copper, option silver\nPressure: 0 to 150 Bar AC voltage, 0 to 105 Bar DC voltage (PTFE seals required for pressure above 30 Bar)\nTemperature: -10 to +180°C Max\nVacuum: Torr 10-6 Max\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM, Option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon, Butyl IIR. PTFE must be used for pressure over 30 Bar.\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option ADS60**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.\nOther options: Manual Over Ride, Silver shading ring, degreased and other custom made options.

131 in stock Model: ADS6000

1/8 1/4 3/8 Steam Solenoid Valve 0-10 Bar 2/2 Normally Closed 3-4mm

1/8 1/4 3/8 Brass steam solenoid valve CS Fluid Power SA6A, SA8A, SA10A\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/8, 1/4 or 3/8 BSP, option NPT thread.\nPressure: 0 to 10 Bar\nMedia Temperature: +180ºC Max\nSeals: PTFE\nOrifice: 3.0mm 1/8 and 1/4, 4.0mm 3/8 thread\nKv flow factor: 4.43 or 8.29 L/min according to orifice, based on water with 1 Bar pressure drop.\nMedia: steam, hot air, hot water and hot oils under 50CST and most other non agressive fluids and gases compatible with materials of construction.\nCoil: WPG1 12 Watt H Rated IP67 UL CSA CE approved DIN43650A 100% duty rated.\nCoil: WPG2 18 Watt H Rated IP67 UL CSA CE approved DIN43650A 100% duty rated.\nProtection: IP65 with LED connector (Included)\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\nVoltages: 12vDC, 24vDC, 48vDC or 12vAC, 24vAC, 48vAC, 110vAC, 230vAC 50/60Hz\n\nA particular favourite for ozone cleaning applications.

105 in stock Model: SA6,SA8,SA10

11/2 Brass Solenoid Valve 0.5-15 Bar 2/2 Normally Closed PU225A-14 (ATEX option)

11/2 inch Brass solenoid valve Model PU225A-14 ®\nFunction: 2/2 way normally closed\nOperation: pressure assisted (requires 0.5 Bar min pressure differential)\nPort: 11/2 BSP, option NPT thread\nPressure: 0.5 to 10 Bar differential, Max working 15 Bar\nBody: Brass\nInternals: Stainless steel\nOrifice: 38.0 mm\nKv flow factor: 367 L/min based on water with 1 Bar pressure difference.\nSealing: NBR standard optional EPDM, Viton (FKM) or HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nOption: degreased, with all traces of oil and grease removed.\nTemperature: -15°C to +80°C with NBR seals, option Viton (FKM) -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\nHS code 84818030

104 in stock Model: PU22514