Search Results

Search results for "8150"

1/4 Brass Solenoid Valve 0-150 Bar 2/2 Normally Closed 1.2-5mm

1/4 inch Miniature brass solenoid valve CS Fluid Power AD8000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSP standard, option NPT or Rc thread.\nPressure: 0 to 150 Bar (depending on orifice and coil power level)\nVacuum: Torr 10-6 Max\nBody: Brass\nInternals: stainless steel\nOrifice: 1.2 mm, 1.6 mm, 2 mm, 3 mm, 4 mm or 5 mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR or Hypalon. (PTFE must be used for pressures over 30 Bar).\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option available AD80**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC. \nOther options: Manual Over Ride and other custom made options.

1572 in stock Model: AD8000

1/8 1/4 solenoid valve 3/2 Normally Closed 0-8 Bar 1.4mm (Option Manifold + ATEX)

1/8 1/4 inch 3 way solenoid valve Shako PU320\nFunction: 3/2 way normally closed (can be converted to 2/2 way with M5 blanking plug in exhaust port)\nOperation: direct acting\nPort: 1/8 or 1/4 BSP, option NPT thread (exhaust port M5)\nOption: order as a complete manifold system (includes valve + mounting kit nuts, bolts + O ring - already assembled ready)\nPressure: 0 to 8 Bar\nBody: Anodised aluminium\nInternals: stainless steel and Brass\nOrifice: 1.4mm\nKv flow factor: 1.0 L/min based on water with 1 Bar pressure drop.\nSeals: NBR standard, option FKM or EPDM\nMedia: compressed air, vacuum and inert gases compatible with materials of construction.\nCoil: 4.5 Watt Nass Magnet system 8/22 CE IP65 Class F DIN43650B 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\n\nThe PU320M can be ordered as a manifold with single inlet multiple outlets for multiple pneumatic cylinder or actuator control systems and control panels. \nIf you would like your solenoid valve manifold system supplied not assembled just order the single units and order the mounting kit (see related items). Note: 2 valves require 1 assembly kit, 3 valves 2 kits, 4 valves 3 kits, etc.

436 in stock Model: PU320

1/4 Stainless Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm (ATEX option)

1/4 inch Miniature stainless solenoid valve CS Fluid Power ADS8000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSP standard, option NPT or Rc thread.\nBody: 316 stainless steel\nInternals: stainless steel\nPressure: 0 to 150 Bar (PTFE seals required for pressure 30 Bar or more)\nVacuum: Torr 10-6 Max\nTemperature: +180°C Max according to seals\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, Option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon, Butyl IIR. PTFE must be used for pressures over 30 Bar.\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option ADS80**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.\nOther options: Manual Over Ride, Silver shading ring, degreased and other custom made options.

239 in stock Model: ADS8000

1/8- 1/2 Brass Solenoid Valve 1-100 Bar 2/2 Normally Closed 5+6mm

High pressure solenoid valve 1500psi brass CS Fluid Power SAP\nFunction: 2/2 way Normally Closed\nOperation: Pressure assisted (Min 1 Bar pressure differential)\nPort: 1/8, 1/4, 3/8 or 1/2 BSP, option NPT thread\nBody: Brass\nInternals: stainless steel\nPressure: 1 to 100 Bar\nOrifice: 5.0mm standard, Option 6.0mm (SAPXX60 + voltage)\nKv flow factor: 9.1 (5mm orifice) or 16.17 litres (6mm orifice) a minute based on water with a 1 Bar pressure difference.\nSealing: PTFE + NBR, option PTFE with EPDM, FKM, Silicone, VST, Neoprene, ECO, HNBR or Hypalon. Elastomer sealing only 40 Bar Max.\nMedia: air, water, oil, carbon dioxide and most other non-corrosive gases or fluids under 50CST compatible with materials of construction. \nCoil: WPG2 18 Watt UL, CSA, IP67 and CE approved 100% duty rated DIN43650A.\nProtection: IP65 LED connector (Included)\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC or 12vAC, 24vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60Hz.\nIdeally suited for low temperature media down to -60°C such as bottled CO2 (carbon dioxide) CO2 special effects, DMX control systems, cryogenic cannon and high pressure CO2 jet systems up to 100 bar.\nAll SAP solenoid valves are 100% pressure and leak tested.

50 in stock Model: SAP

1/8 - 1/2 Stainless Solenoid Valve 1-100 Bar 2/2 Normally Closed 5+6mm

100 Bar stainless solenoid valve CS Fluid Power SAPS\nFunction: 2/2 way Normally Closed\nOperation: Pressure assisted (Min 1 Bar pressure differential)\nPort: 1/8, 1/4, 3/8 or 1/2 BSP, option NPT thread\nBody: 316 stainless steel\nInternals: stainless steel\nPressure: 1 to 100 Bar\nOrifice: 5.0mm standard, Option 6.0mm (SAPXX60 + voltage)\nKv flow factor: 9.1 litres a minute based on water with a 1 Bar pressure difference.\nSealing: PTFE + NBR, option PTFE with EPDM, HNBR, Neoprene, ECO, Silicone or VST. Option elastomer seal only 40 Bar max.\nMedia: air, water, oil, carbon dioxide and most other slightly corrosive gases or fluids under 50CST compatible with materials of construction.\nCoil: WPG2 18 Watt UL, CSA, IP67 and CE approved 100% duty rated DIN43650A.\nProtection: IP65 LED connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC or 12vAC, 24vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60Hz.\nIdeally suited for low temperature media down to -60C such as bottled CO2 (carbon dioxide) CO2 special effects, DMX control systems, cryogenic cannon and high pressure CO2 jet systems up to 100 bar.\nAll SAP solenoid valves are 100% pressure and leak tested.

29 in stock Model: SAPS