Search Results

Search results for "-43650B"

Electrical Connector 2P+E Industrial Form B without circuit IP65 0-250v

EN 175301-803 (DIN43650B) Industrial Form Hirschmann Connector, 11mm between pins\nGland: PG9 for cable diameter 6 to 8mm \nVoltage: 0 to 250 Volts\nResistance: 4 mOhm Max\nCurrent: 10 Amps max (without circuit), 1 Amp maximum with circuit. \nConnection: DIN43650B industrial form is with PG9 cable entry for 6 to 8mm\nGasket: NBR\nProtection: IP65\nWire connection: clamping contact. \nOption: conduit entry 5 to 6mm or 1/2 NPT conduit entry, with LED, with VDR varistor and Rectified \n\n2022 new terminal block\n\nIn order to establish a suitable electrical connection, the use of ferrules for fine stranded cables are mandatory. Be aware that the wire (conductor) cross-section affects the maximum current load (Amp) capacity.

2247 in stock Model: DIN1

Electrical Connector 2P+E Industrial Form C Micro with 2mtr cable IP67 0-250v

IP67 Moulded pre-wired electrical connector Micro C EN 175301-803 \nMicro C 15.6x15.6mm (9.4mm between pins) 2 meter black 3 core 0.75mm2 H05WF cable with stripping 30mm, green/yellow, brown and blue\nRating: 0-250 volt 1.5 Amp Max\nProtection: IP67\nMaterials: terminal block PA6 GF30\nPoles 2+2E, ground position 6/12 h, contact distance 11mm\nContacts: CuZn zinc plated \nPacked in small plastic bag rolled diameter 20cm. \nManufactured by Nass Magnet.\n

50 in stock Model: DINC-MICRO

Electrical Connector 2P+2E Industrial Form B with cable IP67 0-250v

IP65 Moulded pre-wired electrical connector DIN43650B Industrial Form, 11mm between pins.\nDin 43650B rectangular with 2 or 5 meter black 3 core 0.75mm2 H05WF cable with stripping 30mm, green/yellow, brown and blue\nRating: 0-250 volt 1.5 Amp Max\nProtection: IP67\nMaterials: terminal block PA6 GF30\nPoles 2+2E, ground position 6/12 h, contact distance 11mm\nCircuit: without circuit. \nContacts: CuZn zinc plated \nPacked in small plastic bag rolled diameter 20cm. \nManufactured by Nass Magnet.\n

49 in stock Model: DIN1-industrial-form-B-moulded

Electrical Connector 2P+2E Industrial Form B with LED + cable IP67 24v 230v

IP65 Moulded pre-wired electrical connector EN 175301-803 (DIN43650B) Industrial Form with LED, 11mm between pins\nEN 175301-803 (DIN43650B) rectangular with 2 or 5 meter black 3 core 0.75mm2 H05WF cable with stripping 30mm, green/yellow, brown and blue\nRating: 0-250 volt 1.5 Amp Max\nVoltage: 24vAC/DC, 110vAC/DC or 230vAC/DC\nProtection: IP67\nMaterials: terminal block PA6 GF30\nPoles 2+2E, ground position 6/12 h, contact distance 11mm\nCircuit: with RED LED circuit. \nContacts: CuZn zinc plated \nPacked in small plastic bag rolled diameter 20cm. \nManufactured by Nass Magnet.

49 in stock Model: DIN1LEDR