Search Results

Search results for "22504"

1/2 Brass Solenoid Valve 0.5-15 Bar 2/2 Normally Open NOPU22504

1/2 normally open Brass solenoid valve NOPU22504 (PU225AN-04)\nFunction: 2/2 way normally open\nOperation: pressure assisted (requires min 0.5 Bar pressure differential)\nPressure: 0.5 to 10 Bar differential, 15 Bar max working\nPort: 1/2 BSP, option NPT thread\nBody: Brass\nInternals: stainless steel\nOrifice 13.0mm\nKv flow factor: 40 L/min based on water with 1 Bar pressure drop\nSealing: NBR standard optional EPDM, Viton and HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nTemperature: -15°C to +80°C with NBR seals, option Viton -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nHS code 84818030

585 in stock Model: NOPU22504

1/2 Brass Solenoid Valve 0.5-15 Bar 2/2 Normally Closed PU225A-04 (ATEX option)

1/2 inch Brass solenoid valve Model PU225A-04 ®\nFunction: 2/2 way normally closed\nOperation: pressure assisted (requires 0.5 Bar min pressure differential)\nPressure: 0.5 to 10 Bar differential, Max working 15 Bar\nPort: 1/2 BSP, option NPT thread\nOrifice: 13.0mm\nKv flow factor: 40 L/min based on water with 1 Bar pressure drop\nBody: Brass\nInternals: Stainless steel\nSealing: NBR standard optional EPDM, Viton and HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nOption: degreased, with all traces of oil and grease removed.\nTemperature: -15°C to +80°C with NBR seals, option Viton -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C.\nCoil option: 22003L Latching coil 6 to 12vDC, power pulse stays open, reverse polarity power pulse will stay closed.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nHS code 84818030

584 in stock Model: PU22504

3/8 Brass Solenoid Valve 0.5-15 Bar 2/2 Normally Closed PU225A-03 (ATEX option)

3/8 inch Brass solenoid valve Model PU225A-03 ®\nFunction: 2/2 way normally closed\nOperation: pressure assisted (requires 0.5 Bar min pressure differential)\nPressure: 0.5 to 10 Bar differential, Max working 15 Bar\nPort: 3/8 BSP, option NPT thread\nOrifice: 13.0mm\nKv flow factor: 40 L/min based on water with 1 Bar pressure drop\nBody: Brass\nInternals: Stainless steel\nSealing: NBR standard optional EPDM, Viton and HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nOption: degreased, with all traces of oil and grease removed.\nTemperature: -15°C to +80°C with NBR seals, option Viton -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nCoil option: 22003L Latching coil 6 to 12vDC, power pulse stays open, reverse polarity power pulse will stay closed.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nHS code 84818030

262 in stock Model: PU22503

1/2 Stainless Solenoid Valve 0.5-15 Bar 2/2 Normally Open

1/2 inch stainless steel solenoid valve Shako NOSPU225A-04 (SPU225AN-04)\nFunction: 2/2 way normally open\nOperation: pressure assisted (Min 0.5 Bar differential)\nPort: 1/2 BSPP, option NPT or Rc thread.\nPressure: 0.5 to 10 Bar differential, 15 Bar max working\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: Copper, option without ring (DC only or AC with rectified DIN connector to DC) for demin water, RO water, pure water and Adblue.\nOrifice 13.0mm\nKv flow factor: 40 L/min based on water with 1 Bar pressure drop\nSealing: Viton (FKM) standard optional EPDM, NBR or HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nTemperature: -10°C to +180°C with Viton seals, option NBR -15°C to +80°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nSPU225 solenoid valve is ATEX approved according to 94/9/EC certificate number Sira 09ATEX6180X, and also complies with essential health and safety requirements EN 13463-1:2001 and EN 1364-5:2003.\n\nHS code 84818030

177 in stock Model: NOSPU22504

1/2 Stainless Solenoid Valve 0.5-15 Bar 2/2 Normally Closed SPU225A-04 (ATEX option)

1/2 inch stainless steel solenoid valve Shako SPU225A-04 ®\nFunction: 2/2 way normally closed\nOperation: pressure assisted, requires Min 0.5 Bar differential\nPort: 1/2 BSPP, option NPT or Rc thread.\nPressure: 0.5 to 10 Bar differential, 15 Bar max working\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: Copper, option silver (AC or DC) or without ring ((DC only or AC with rectified DIN connector to DC)) for demin water, RO water, pure water and Adblue.\nOrifice 13.0mm\nKv flow factor: 40 L/min based on water with 1 Bar pressure drop\nSealing: Viton (FKM) standard optional EPDM, NBR or HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nOption: degreased, with all traces of oil and grease removed.\nTemperature: -10°C to +180°C with Viton seals, option NBR -15°C to +80°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\nCoil option: 22003L Latching coil 6 to 12vDC, power pulse stays open, reverse polarity power pulse will stay closed.\n\nSPU225 solenoid valve is ATEX approved according to 94/9/EC certificate number Sira 09ATEX6180X, and also complies with essential health and safety requirements EN 13463-1:2001 and EN 1364-5:2003.\n\nDegreasing available for oxygen use.\n\nHS code 84818030

177 in stock Model: SPU22504