Search Results

Search results for "8016"

1/4 Brass Solenoid Valve 0-150 Bar 2/2 Normally Closed 1.2-5mm

1/4 inch Miniature brass solenoid valve CS Fluid Power AD8000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSP standard, option NPT or Rc thread.\nPressure: 0 to 150 Bar (depending on orifice and coil power level)\nVacuum: Torr 10-6 Max\nBody: Brass\nInternals: stainless steel\nOrifice: 1.2 mm, 1.6 mm, 2 mm, 3 mm, 4 mm or 5 mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR or Hypalon. (PTFE must be used for pressures over 30 Bar).\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option available AD80**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC. \nOther options: Manual Over Ride and other custom made options.

1572 in stock Model: AD8000

1/4 Stainless Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm (ATEX option)

1/4 inch Miniature stainless solenoid valve CS Fluid Power ADS8000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSP standard, option NPT or Rc thread.\nBody: 316 stainless steel\nInternals: stainless steel\nPressure: 0 to 150 Bar (PTFE seals required for pressure 30 Bar or more)\nVacuum: Torr 10-6 Max\nTemperature: +180°C Max according to seals\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, Option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon, Butyl IIR. PTFE must be used for pressures over 30 Bar.\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option ADS80**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.\nOther options: Manual Over Ride, Silver shading ring, degreased and other custom made options.

239 in stock Model: ADS8000

3/4 Water solenoid valve 0.2-10 Bar normally closed triple 90 degree T90

3/4 plastic water washing machine triple solenoid valve WRAS approved T90\nFunction: 2/2 way normally closed\nOperation: Pressure assisted (Min 0.2 Bar pressure differential)\nPort: 3/4 BSP Male inlet with three 90 degree (right angle) 10.5mm hose tail outlets.\nPressure: 0.2 to 10 Bar \nOrifice: 11.0mm \nBody: Nylon white good grade GF\nCoil: R 6.2 Watts IP00 with faston tag Class F 60% duty rated (Max 2 Min power ON with 3 min power OFF for cooling)\nVoltage: 12vDC, 24vDC, 12vAC, 24vAC, 110vAC or 230vAC\nApprovals: WRAS, KTW and DM174 for drinking water production, transfer and storage, ACS health compliance certificate, ENEC European Norms Electrical Certification, CSV (European Union Aviation Safety Agency), MOCA FCM (Food Contact Materials), NSF food certification for public health protection and option for UL Underwriter Laboratories certified. \n\nThis is a very common RPE type R cold Water inlet Solenoid Valve for most domestic and commercial washing machine, dishwasher, drinking water dispensers and most other automated water control systems. Standard 3/4 BSP appliance hose fits directly onto the 3/4 BSP male thread.

7 in stock Model: T90

1/4 Stainless Solenoid Valve 0-42 Bar 2/2 Latching 1.2-5mm

1/4 inch stainless latching solenoid valve CS Fluid Power LADS8000.\nFunction: 2/2 way latching bistable\nOperation: direct acting\nBody: 316 stainless steel\nInternals: Stainless steel\nShading ring: without\nPort: 1/4 BSP, option NPT thread.\nOrifice: 1.2mm, 1.6mm, 2mm, 3mm, 4mm, 5mm\nKv flow factor: 1.0 to 9.2 Min according to orifice, based on water with 1 Bar pressure difference. \nPressure: vacuum 10-6 Torr to 42 Bar (depending on coil power and orifice size)\nSeals: NBR standard, option FKM, VST, EPDM, Silicone, PTFE, Neoprene, Hypalon, ECO and HNBR.\nMedia: air, water, light oil, vacuum 10-6 Torr and most slighty aggressive fluids under 50CST and gases compatible with materials of construction.\nCoil: WPG1 12 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.\nCoil: WPG2 18 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.\nProtection: IP65 with LED connector (included)\nVoltages: 12vDC or 24vDC\n\nLADS8000 Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again swap the live and neutral wires back to original position and repeat the process.

1 in stock Model: LADS8000

2 Nylon solenoid valve 0.3-10 Bar 2/2 Normally Closed GP50

2 inch Plastic Water Solenoid Valve GP50\nFunction: 2/2 way normally closed with manual override, flow regulator with anti water hammer design\nOperation: pressure assisted (requires minimum 0.3 Bar pressure difference)\nPort 2 BSP thread, option NPT\nPressure: 0.3 to 10 Bar\nBody: reinforced Nylon\nInternals: stainless steel\nSeals: NBR\nTemperature: +5°C to +50°C\nMedia: water and other fluids under 50 CST or gases compatible with materials of construction.\nOrifice: 55mm\nKv flow factor: 600 L/min based on water with 1 Bar pressure difference\nOpen/close time: 100 milliseconds max\nCoil: 5 Watt DIN43650B IP65 100% continuously rated\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\nCoil option: 6.8 Watt higher power coil can be used with stronger armature spring for slightly contaminated media. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC and 220vDC or 12vAC, 24vAC, 48vAC, 110vAC or 230vAC 50/60Hz.

1 in stock Model: GP50