Search Results

Search results for "0312"

3/4 Stainless Solenoid Valve 0-10 Bar 2/2 Normally Closed

3/4 inch Stainless steel solenoid valve Queen MD20CSC14 \nFunction: 2/2 way Normally Closed\nOperation: Assisted Lift (Zero rated)\nPort: 3/4 BSPT thread, option NPT thread\nPressure: 0 to 10 Bar (Air/Water), 0 to 7 Bar (Oil)\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: Copper, option without shading ring (DC only or rectified AC/DC), for demin water, RO water and adblue.\nSealing: EPDM standard; option NBR or FKM. \nMedia: vacuum (10 Torr with NBR sealing), compressed air, water, light oil, RO or pure water, diesel fuels and most liquids under 50CST and gas compatible with the materials of construction.\nOrifice: 23.0mm \nKv flow factor: 90.1 L/Min water with 1 bar pressure difference. \nCoil: M16 26 Watt IP65 CE approved Class F DIN43650A, 100% duty rated.\nCoil option: M17 high power Class N DIN43650A IP65 coil, Pressure 0 to 16 Bar, Ambient Temp +50°C\nProtection: IP65 with connector (Included)\nVoltages: 12vDC, 24vDC, 48vDC or 125vDC or 24vAC, 110vAC and 230vAC.

127 in stock Model: MD20SCS14M16

Equal elbow push-in airline fitting M5 to 1/2 BSP 4mm to 12mm NPV

S_Line Pneumatic Push-in Elbow Union Connector model NPV\n\nTo suit tube sizes 4mm to 12mm\n\nOne Touch push to connect configuration allow an instant tubing connection\n\nStrong nickel plated brass sleeve and engineering plastic (POM) body disconnection by pressing the sleeve and then simply removing the tube from the fitting\n\nNickel Plated Brass and POM body ensures anti contamination\n\nFor use in pneumatic systems upto 9 Bar with maximum temperature of 60 degrees Celsius

109 in stock Model: NPV

1/8- 1/2 Brass Solenoid Valve 1-100 Bar 2/2 Normally Closed 5+6mm

High pressure solenoid valve 1500psi brass CS Fluid Power SAP\nFunction: 2/2 way Normally Closed\nOperation: Pressure assisted (Min 1 Bar pressure differential)\nPort: 1/8, 1/4, 3/8 or 1/2 BSP, option NPT thread\nBody: Brass\nInternals: stainless steel\nPressure: 1 to 100 Bar\nOrifice: 5.0mm standard, Option 6.0mm (SAPXX60 + voltage)\nKv flow factor: 9.1 (5mm orifice) or 16.17 litres (6mm orifice) a minute based on water with a 1 Bar pressure difference.\nSealing: PTFE + NBR, option PTFE with EPDM, FKM, Silicone, VST, Neoprene, ECO, HNBR or Hypalon. Elastomer sealing only 40 Bar Max.\nMedia: air, water, oil, carbon dioxide and most other non-corrosive gases or fluids under 50CST compatible with materials of construction. \nCoil: WPG2 18 Watt UL, CSA, IP67 and CE approved 100% duty rated DIN43650A.\nProtection: IP65 LED connector (Included)\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC or 12vAC, 24vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60Hz.\nIdeally suited for low temperature media down to -60°C such as bottled CO2 (carbon dioxide) CO2 special effects, DMX control systems, cryogenic cannon and high pressure CO2 jet systems up to 100 bar.\nAll SAP solenoid valves are 100% pressure and leak tested.

50 in stock Model: SAP

1/8 inch 5/2 Air solenoid valve single acting 1.5-10 Bar 18mm wide AM520S

1/8 inch 5/2 way solenoid valve single acting AM52001S\nFunction: 5/2 way single acting with manual over ride\nOperation: internal pilot\nPort: 1/8 BSP thread, option NPT or Rc\nWidth: 18mm\nPressure: 1.5 to 8 Bar, Max working 10 Bar\nOrifice: 11mm²\nTemperature: -10°C to +50°C\nBody: Aluminium alloy\nSeals: NBR\nMedia: Compressed air and inert gases\nCoil: 2.5 Watt IP65 Class F 100% duty rated with DIN43650C IP65 coil, option 30cm flying lead wire.\nVoltages: 12vDC, 24vDC, 24vAC, 110vAC or 230vAC\nOption: Base mount AM520B\n\nFor manifold to suit, see MF520 in related items and select correct size option

30 in stock Model: AM520S

3/4 Water solenoid valve 0.2-10 Bar normally closed triple 90 degree T90

3/4 plastic water washing machine triple solenoid valve WRAS approved T90\nFunction: 2/2 way normally closed\nOperation: Pressure assisted (Min 0.2 Bar pressure differential)\nPort: 3/4 BSP Male inlet with three 90 degree (right angle) 10.5mm hose tail outlets.\nPressure: 0.2 to 10 Bar \nOrifice: 11.0mm \nBody: Nylon white good grade GF\nCoil: R 6.2 Watts IP00 with faston tag Class F 60% duty rated (Max 2 Min power ON with 3 min power OFF for cooling)\nVoltage: 12vDC, 24vDC, 12vAC, 24vAC, 110vAC or 230vAC\nApprovals: WRAS, KTW and DM174 for drinking water production, transfer and storage, ACS health compliance certificate, ENEC European Norms Electrical Certification, CSV (European Union Aviation Safety Agency), MOCA FCM (Food Contact Materials), NSF food certification for public health protection and option for UL Underwriter Laboratories certified. \n\nThis is a very common RPE type R cold Water inlet Solenoid Valve for most domestic and commercial washing machine, dishwasher, drinking water dispensers and most other automated water control systems. Standard 3/4 BSP appliance hose fits directly onto the 3/4 BSP male thread.

7 in stock Model: T90