Search Results

Search results for "0313"

Solenoid Coil Core 14.6mm, H 42mm, W 36mm, L 45mm 12 to 230v

24vDC Solenoid Valve Coil Nass Magnet 36mm width\n\nSystem: 13/36 Power Level 5 Class H 180°C\nConnection type: according to DIN EN 175301-803-A, DIN43650A IP65\nMoulding: thermoset resin\nVoltage tolerance: -10% to +10%\nTemperature: -20 °C +50 °C ambient \nRelative duty cycle: 100% \nThermal class: according to DIN VDE 0580 Class H\nProtection: EN 60529 IP65 with connector.\n\nVoltages: \n12vDC/ 36vAC 17.1 / 25VA 8.4 Ω (dual voltage) (113-030-0120)\n24vAC 25VA 4.1 Ω (113-030-0127, previously 0545 00.1-00/5810)\n24vDC 18.5 Watts 30.9 Ω (113-030-0132)\n110vAC 25VA 70.4 Ω (113-030-0137)\n110vDC 17.1 Watts 675 Ω (113-030-0136)\n230vAC 25VA 362 Ω (113-030-0138)\n220vDC 18 Watts 2550 Ω 0545 00.1-00/5889\n\nFits PU220D, PU220A, NOPU220, NOPK and PK series solenoid valves.\n\nCustoms tariff number: 84819000

1641 in stock Model: 22005

3/4 Water solenoid valve 0.2-10 Bar normally closed single 90 degree S90

3/4 plastic water washing machine inlet single solenoid valve WRAS approved S90\nFunction: 2/2 way normally closed\nOperation: Pressure assisted (Min 0.2 Bar pressure differential)\nPort: 3/4 BSP Male inlet with 90 degree (right angle) single 104F 10.5mm or 120F 12.5mm hose tail outlet.\nPressure: 0.2 to 10 Bar \nOrifice: 11.0mm \nBody: Nylon white good grade GF\nCoil: R 6.2 Watts IP00 with faston tag Class F 60% duty rated (Max 2 Min power ON with 3 min power OFF for cooling)\nVoltage: 12vDC, 24vDC, 12vAC, 24vAC, 110vAC or 230vAC\nApprovals: WRAS, KTW and DM174 for drinking water production, transfer and storage, ACS health compliance certificate, ENEC European Norms Electrical Certification, CSV (European Union Aviation Safety Agency), UL Underwriter Laboratories certified, MOCA FCM (Food Contact Materials), NSF food certification for public health protection. \n\nThis is a very common RPE type R cold Water inlet Solenoid Valve for most domestic and commercial washing machine, dishwasher, drinking water dispensers and most other automated water control systems. Standard 3/4 BSP appliance hose fits directly onto the 3/4 BSP male thread.

68 in stock Model: S90

1/4 inch 5/2 Air solenoid valve double acting 1.5-10 Bar 22mm wide BM520D (ATEX option)

1/4 inch 5/2 way solenoid valve double acting BM520D\nFunction: 5/2 way double acting with manual override\nOperation: internal pilot\nPort: 1/4 BSP thread, option NPT or Rc (Exhaust ports 1/8)\nWidth: 22mm\nPressure: 1.5 to 8 Bar, Max working 10 Bar\nOrifice: 18mm²\nTemperature: -10C to +50C\nBody: Aluminium alloy\nSeals: NBR\nMedia: Compressed air and inert gases\nCoil: 4.5 Watt IP65 Class F 100% duty rated DIN43650B, option with 30cm flying lead wire.\nVoltages: 12vDC, 24vDC, 24vAC, 110vAC or 230vAC\nOption: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\n\nFor manifold to suit, see MF520 in related items and select correct size option

55 in stock Model: BM520D

Solenoid Coil Core 16mm, H 40.5mm, W 50.0mm, L 50.0mm WPA3C 22W

Solenoid valve Coil Core 16mm CS Fluid Power WP-A3-C\nBore: 16.6mm, Top plate 8.2mm\nHeight: 43.2mm\nDiameter: 52.0mm\nInsulation: Class H (180°C / 311°F)\nAmbient Temp: -20°C to +60°C / -4°F to +140°F\nProtection: IP54 with 30cm flying lead wires\nRating: 100% duty rated\nAvailable voltages: 12vDC, 24vDC, 48vDC or 24vAC, 110vAC, 230vAC 50/60Hz.\n\n\nPower 12vDC: 21.6 Watts, 2.97 Amp, Resistance 4.1 Ohm +/- 3% at 20-25°C (Wires Blue + White)\n\nPower 24vDC: 22.6 Watts, 1.54Amp, Resistance 15.7 Ohm +/- 3% at 20-25°C (Wires Red + White)\n\nPower 24vAC 50Hz: 27.5 Watts, 2.42 Amp, Resistance 2.1 Ohm +/- 3% at 20-25°C (Wires Black + Red)\nPower 24vAC 60Hz: 20.3 Watts, 1.83 Amp, Resistance 2.1 Ohm +/- 3% at 20-25°C (Wires Black + Red)\n\nPower 110vAC 50Hz: 24.8 Watts, 0.61 Amp, Resistance 30 Ohm +/- 3% at 20-25°C (Wires Blue + Blue)\nPower 110vAC 60Hz: 19.3 Watts, 0.46 Amp, Resistance 30 Ohm +/- 3% at 20-25°C (Wires Blue + Blue)\n\nPower 220vAC 50Hz: 12.4 Watts, 0.14 Amp, Resistance 232 Ohm +/- 3% at 20-25°C (Wires Red + Red) \nPower 220vAC 60Hz: 10.3 Watts, 0.11 Amp, Resistance 232 Ohm +/- 3% at 20-25°C (Wires Red + Red) \n\nPower 240vAC 50Hz: 17.8 Watts, 0.2 Amp, Resistance 216 Ohm +/- 3% at 20-25°C (Wires Red + Red) \nPower 240vAC 60Hz: 14.3 Watts, 0.15 Amp, Resistance 216 Ohm +/- 3% at 20-25°C (Wires Red + Red)

26 in stock Model: WPA3C

2 Gas Solenoid Valve EN161 0-200mBar Auto Reset Elektrogas VMR62

2 inch Gas Solenoid Valve EN161 Elektrogas VMR62\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 2 BSP thread, Option NPT thread (N)\nPressure: 0 to 200 millibar, options 500 millibar or 6 Bar\nMedia: Air and Natural Gas, option (J) Biogas and (K) Coke oven gas (COG)\nCertified: EN161 Class A Group 2 and CE registration 0063AQ1350 by GASTEC, SIL3 to IEC EN 61508 by Intercert certificate no. C-IT.AB86.B.04357 \nKvs flow factor: 40.0 m3/hr, equipped with flow rate adjustment\nBody: Aluminium\nSeals: NBR based rubber certified for gas (EN549)\nOpen/close time: <1 second \nTemperature: -15°C to +60°C\nMesh filter: 600 µm protects valve seat, disc and downstream components\nGauge ports: 1/4 BSP pressure gauge ports on two sides of the inlet chamber, to connect pressure gauges, pressure switches, leakage tester or other gas equipment.\nProof of closure: 1/8BSP base port to accept PCS switch fitted as standard to all 230vAC models that we stock.\nVoltage: 230vAC standard, option for 12vDC, 24vDC, 24vAC and 110vAC\nCoil: IP54 EN60529 with terminal box M20x1.5 (EN50262) and PG9 cable gland to avoid water and dirty contamination.\nElectrical safety: Class I (EN 60335-1)\nCoil: Insulation Class H 200°C, thermal resistance Class F 155°C\nVoltage tolerance: -15% to +10%\n\nCoil option: Low power coil (L), ATEX Ex-proof Zones 2 and 22, according to 94/9/EC Directive, Category II 3 G, D protection Ex n A II T4 X, Ex tD A 22 IP54 T135 X \n\nOption: Proof of closure switch (P): Mechanical closed position electrical switch PCS6.\n\nValves are 100% tested by computerised testing and are fully warranted.\n\nAll components are designed to withstand any mechanical, chemical and thermal condition occurring during typical service. Effective impregnation and surface treatments have been used to improve mechanical reliability , sealing and corrosion resistance. \n\nThe VMR62 is an auto reset fast opening single-stage solenoid valve for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and others gas consuming equipment. \n\nVMR1930.1415 230vAC High power coil for VMR352 + VMR62 6 Bar version\nVMR1930.1416 230vAC coil for VMR352, VMR42 + VMR62 \nVMR1930.1452 24vAC/DC coil for VMR352, VMR42 + VMR62

11 in stock Model: VMR62