Search Results

Search results for "6012"

1/2 Brass Solenoid Valve 0.5-15 Bar 2/2 Normally Closed PU225A-04 (ATEX option)

1/2 inch Brass solenoid valve Model PU225A-04 ®\nFunction: 2/2 way normally closed\nOperation: pressure assisted (requires 0.5 Bar min pressure differential)\nPressure: 0.5 to 10 Bar differential, Max working 15 Bar\nPort: 1/2 BSP, option NPT thread\nOrifice: 13.0mm\nKv flow factor: 40 L/min based on water with 1 Bar pressure drop\nBody: Brass\nInternals: Stainless steel\nSealing: NBR standard optional EPDM, Viton and HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nOption: degreased, with all traces of oil and grease removed.\nTemperature: -15°C to +80°C with NBR seals, option Viton -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C.\nCoil option: 22003L Latching coil 6 to 12vDC, power pulse stays open, reverse polarity power pulse will stay closed.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nHS code 84818030

584 in stock Model: PU22504

1/8 Stainless Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm

1/8 inch Miniature stainless solenoid valve CS Fluid Power ADS6000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/8 BSP standard, option NPT or Rc thread.\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: copper, option silver\nPressure: 0 to 150 Bar AC voltage, 0 to 105 Bar DC voltage (PTFE seals required for pressure above 30 Bar)\nTemperature: -10 to +180°C Max\nVacuum: Torr 10-6 Max\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM, Option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon, Butyl IIR. PTFE must be used for pressure over 30 Bar.\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option ADS60**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.\nOther options: Manual Over Ride, Silver shading ring, degreased and other custom made options.

131 in stock Model: ADS6000

1/8 Brass Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm

1/8 inch Miniature brass solenoid valve CS Fluid Power AD6000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/8 BSP standard, option NPT or Rc thread.\nBody: Brass\nInternals: stainless steel\nPressure: 0 to 150 Bar (PTFE seals required for pressures over 30 Bar)\nVacuum: Torr 10-6 Max\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR or Hypalon. (PTFE must be used for pressures over 30 Bar).\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67, Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67, Class H 100% duty rated\nCoil option AD60**: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC. \nOther options: Manual Over Ride and other custom made options.

96 in stock Model: AD6000

3/4 Water solenoid valve 0.2-10 Bar normally closed single 90 degree S90

3/4 plastic water washing machine inlet single solenoid valve WRAS approved S90\nFunction: 2/2 way normally closed\nOperation: Pressure assisted (Min 0.2 Bar pressure differential)\nPort: 3/4 BSP Male inlet with 90 degree (right angle) single 104F 10.5mm or 120F 12.5mm hose tail outlet.\nPressure: 0.2 to 10 Bar \nOrifice: 11.0mm \nBody: Nylon white good grade GF\nCoil: R 6.2 Watts IP00 with faston tag Class F 60% duty rated (Max 2 Min power ON with 3 min power OFF for cooling)\nVoltage: 12vDC, 24vDC, 12vAC, 24vAC, 110vAC or 230vAC\nApprovals: WRAS, KTW and DM174 for drinking water production, transfer and storage, ACS health compliance certificate, ENEC European Norms Electrical Certification, CSV (European Union Aviation Safety Agency), UL Underwriter Laboratories certified, MOCA FCM (Food Contact Materials), NSF food certification for public health protection. \n\nThis is a very common RPE type R cold Water inlet Solenoid Valve for most domestic and commercial washing machine, dishwasher, drinking water dispensers and most other automated water control systems. Standard 3/4 BSP appliance hose fits directly onto the 3/4 BSP male thread.

68 in stock Model: S90

Solenoid Coil Core 16.1mm, H 50mm, W 37.5mm, L 37.5mm M16

M16 Solenoid coil ISO 43650A 26 Watt 16mm bore\nDIN43650A Class F windings (155C), IP65 protection (with connector)\nDimensions: Core/ID 16.1mm, Height 50mm, Width/diameter 37.5mm. \nVoltages: 12vDC, 24vDC, 48vDC, 125vDC or 24vAC, 110vAC or 230volt AC 50/60Hz. \nPower: DC 26 Watts\nPower: AC 50/60 Hz = Inrush 70VA Holding 35VA\n\nResistance: \n12vDC 5.3 Ohms 2.14 Amps, \n24vDC 21.7 Ohms 1.1 Amps\n48vDC 84 Ohms\n125vDC 581 Ohms \n24vAC 4.1 Ohms\n110vAC 59 Ohms 0.27 Amps\n220vAC 259 Ohms 0.12 Amps.\n\nCommonly found on many hydraulic valve systems and Queen MD and Z Tide BFE solenoid valves.

22 in stock Model: M16