Search Results

Search results for "96-2"

3/8 to 2 BSP Brass Solenoid Valve 0-3.5 Bar 2/2 Latching

Brass latching / bi-stable solenoid valve CS Fluid Power LAD14-50.\nFunction: 2/2 way latching bistable\nOperation: direct acting\nBody: Brass\nInternals: Stainless steel\nShading ring: without\nPort: 3/8, 1/2, 3/4, 1, 11/4, 11/2 and 2 BSP, option NPT thread.\nOrifice: 15mm, 20mm, 25mm, 35mm and 50mm (depending on port size)\nKv flow factor: 64.4 to 686.4 L/Min according to port size based on water with 1 Bar pressure difference. \nPressure: vacuum 10-6 Torr to 3.5 Bar (sizes 3/8 to 11/2)\nPressure: vacuum 10-6 Torr to 2.5 Bar (size 2 inch)\nSeals: NBR standard, option FKM, VST, EPDM, Silicone, Neoprene, Hypalon, ECO and HNBR.\nMedia: air, water, light oil, vacuum 10-6 Torr and most fluids under 50CST and gases compatible with materials of construction.\nCoil: WPG2 18 Watt IP67 DIN43650A UL CSA and CE approved 100% duty rated.\nProtection: IP65 with LED connector (included)\nVoltages: 12vDC or 24vDC\n\nLAD14, LAD15, LAD20, LAD25, LAD35, LAD40 and LAD50 Latching solenoid valves require only a short electrical pulse to open and will stay open; even if the power is off. To close the valve a short electrical power pulse with reverse polarity (i.e. swap live and neutral wires) will de-energise the internal magnet and the valve will close and stay closed. To open the solenoid valve again swap the live and neutral wires back to original position and repeat the process.

4 in stock Model: LAD1450

DN150 Gas Solenoid Valve EN161 0-200mBar Auto Reset Elektrogas VMR952

6 inch Gas Solenoid Valve EN161 Elektrogas VMR952\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 6\" DN150 PN16 flange, (Option ANSI150Lb)\nPressure: 0 to 200 millibar, options 500 millibar or 6 Bar (6000 mbar)\nMedia: Air, Natural Gas, option (J) Biogas and (K) Coke oven gas (COG)\nCertified: EN161 Class A Group 2 and CE registration 0063AQ1350 by GASTEC, SIL3 to IEC EN 61508 by Intercert certificate no. C-IT.AB86.B.04357 \nKvs flow factor: 315.0 m³/Hr, equipped with flow rate adjustment\nBody: Aluminium\nSeals: NBR based rubber certified for gas (EN549)\nOpen/close time: <1 second \nTemperature: -15°C to +60°C\nMesh filter: 600 µm protects valve seat, disc and downstream components\nGauge ports: 1/4 BSP pressure gauge ports on two sides of the inlet chamber, to connect pressure gauges, pressure switches, leakage tester or other gas equipment.\nProof of closure: 1/8BSP port to accept PCS switch fitted as standard.\nVoltage: 230vAC standard, option for 12vDC, 24vDC, 24vAC and 110vAC\nCoil: IP54 EN60529 with terminal box M20x1.5 (EN50262) and PG9 cable gland to avoid water and dirty contamination.\nElectrical safety: Class I (EN 60335-1)\nCoil: Insulation Class H 200°C, thermal resistance Class F 155°C\nVoltage tolerance: -15% to +10%\n\nCoil option: Low power coil (L), ATEX Ex-proof Zones 2 and 22, according to 94/9/EC Directive, Category II 3 G, D protection Ex n A II T4 X, Ex tD A 22 IP54 T135 X \n\nOption: Proof of closure switch (P): Mechanical closed position electrical switch PCS95.\n\nValves are 100% tested by computerised testing and are fully warranted.\n\nAll components are designed to withstand any mechanical, chemical and thermal condition occurring during typical service. Effective impregnation and surface treatments have been used to improve mechanical reliability , sealing and corrosion resistance. \n\nThe VMR952 is an auto reset fast opening single-stage solenoid valve for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and others gas consuming equipment.

1 in stock Model: VMR952