Search Results

Search results for "22503"

3/8 Brass Solenoid Valve 0.5-10 Bar 2/2 Normally Open NOPU22503

3/8 normally open Brass solenoid valve NOPU225A-03 (PU225AN-03)\nFunction: 2/2 way normally open\nOperation: pressure assisted (requires 0.5 Bar min pressure differential)\nPort: 3/8 BSP, option NPT thread\nPressure: 0.5 to 10 Bar differential, 15 Bar max working\nOrifice: 13.0mm\nKv flow factor: 40 L/min based on water with 1 Bar pressure drop\nBody: Brass\nInternals: stainless steel\nSealing: NBR standard optional EPDM, Viton and HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nTemperature: -15°C to +80°C with NBR seals, option Viton -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nHS code 84818030

262 in stock Model: NOPU22503

3/8 Brass Solenoid Valve 0.5-15 Bar 2/2 Normally Closed PU225A-03 (ATEX option)

3/8 inch Brass solenoid valve Model PU225A-03 ®\nFunction: 2/2 way normally closed\nOperation: pressure assisted (requires 0.5 Bar min pressure differential)\nPressure: 0.5 to 10 Bar differential, Max working 15 Bar\nPort: 3/8 BSP, option NPT thread\nOrifice: 13.0mm\nKv flow factor: 40 L/min based on water with 1 Bar pressure drop\nBody: Brass\nInternals: Stainless steel\nSealing: NBR standard optional EPDM, Viton and HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nOption: degreased, with all traces of oil and grease removed.\nTemperature: -15°C to +80°C with NBR seals, option Viton -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nCoil option: 22003L Latching coil 6 to 12vDC, power pulse stays open, reverse polarity power pulse will stay closed.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nHS code 84818030

262 in stock Model: PU22503

1/8- 1/2 Brass Solenoid Valve 1-100 Bar 2/2 Normally Closed 5+6mm

High pressure solenoid valve 1500psi brass CS Fluid Power SAP\nFunction: 2/2 way Normally Closed\nOperation: Pressure assisted (Min 1 Bar pressure differential)\nPort: 1/8, 1/4, 3/8 or 1/2 BSP, option NPT thread\nBody: Brass\nInternals: stainless steel\nPressure: 1 to 100 Bar\nOrifice: 5.0mm standard, Option 6.0mm (SAPXX60 + voltage)\nKv flow factor: 9.1 (5mm orifice) or 16.17 litres (6mm orifice) a minute based on water with a 1 Bar pressure difference.\nSealing: PTFE + NBR, option PTFE with EPDM, FKM, Silicone, VST, Neoprene, ECO, HNBR or Hypalon. Elastomer sealing only 40 Bar Max.\nMedia: air, water, oil, carbon dioxide and most other non-corrosive gases or fluids under 50CST compatible with materials of construction. \nCoil: WPG2 18 Watt UL, CSA, IP67 and CE approved 100% duty rated DIN43650A.\nProtection: IP65 LED connector (Included)\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC or 12vAC, 24vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60Hz.\nIdeally suited for low temperature media down to -60°C such as bottled CO2 (carbon dioxide) CO2 special effects, DMX control systems, cryogenic cannon and high pressure CO2 jet systems up to 100 bar.\nAll SAP solenoid valves are 100% pressure and leak tested.

50 in stock Model: SAP

3/8 Steam Solenoid Valve 0.5-10 Bar 2/2 Normally Closed

3/8 inch Brass Steam solenoid valve Shako PU225S-03\nFunction: 2/2 way normally closed\nOperation: Pressure assisted (Requires Min 0.5 Bar pressure difference)\nPort: 3/8 BSPP, option NPT or Rc thread.\nBody: Brass\nInternals: stainless steel\nSeals: PTFE\nPressure: 0.5 to 10 Bar Steam\nPressure: 0.5 to 15 Bar air / water and non aggressive fluids up to 50CST and gases compatible with materials of construction.\nOrifice: 13.0mm\nKv flow factor: 64.35 L/min based on water with 1 Bar pressure drop.\nTemperature: -40ºC to +180ºC\nCoil: Nass Magnet Class H 15 Watt IP65 DIN43650A 100% duty rated.\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 48vAC, 110vAC, 230vAC, or 380vAC 50/60hz.

25 in stock Model: PU22503S

3/8 Brass Solenoid Valve 0.5-10 Bar 2/2 Latching

3/8 inch Brass solenoid valve Model LPU225A-03\nFunction: 2/2 way latching (power pulse stays open / reverse polarity stays closed)\nOperation: pressure assisted (requires 0.5 Bar min pressure differential)\nPressure: 0.5 to 10 Bar differential, Max working 15 Bar\nPort: 3/8 BSP, option NPT thread\nOrifice: 13.0mm\nKv flow factor: 40 L/min based on water with 1 Bar pressure drop\nBody: Brass\nInternals: Stainless steel\nSealing: NBR standard optional EPDM, Viton and HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nTemperature: -15°C to +80°C with NBR seals, option Viton -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 22003L Latching coil 6vDC or 12vDC, 10-20 mSec power pulse stays open, reverse polarity power pulse will stay closed.\nProtection: IP65 with connector (Included)\nVoltages: any 6v up to 12vDC.

15 in stock Model: LPU22503