Search Results

Search results for "-18"

1/4 Brass Solenoid Valve 0-150 Bar 2/2 Normally Closed 1.2-5mm

1/4 inch Miniature brass solenoid valve CS Fluid Power AD8000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/4 BSP standard, option NPT or Rc thread.\nPressure: 0 to 150 Bar (depending on orifice and coil power level)\nVacuum: Torr 10-6 Max\nBody: Brass\nInternals: stainless steel\nOrifice: 1.2 mm, 1.6 mm, 2 mm, 3 mm, 4 mm or 5 mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM standard, option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR or Hypalon. (PTFE must be used for pressures over 30 Bar).\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option available AD80**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC. \nOther options: Manual Over Ride and other custom made options.

1572 in stock Model: AD8000

1 Brass Solenoid Valve 0-7 Bar 2/2 Normally Closed PU220A-08

1 inch Brass solenoid valve, Shako PU220A-08 ®\nFunction: 2/2 way normally closed\nOperation: assisted lift (zero-rated)\nPort: 1 BSP, option NPT thread\nBody: Brass\nInternals: stainless steel\nPressure: 0 to 7 Bar (AC) or 0 to 5 Bar (DC voltage)\nVacuum: 80% vacuum -0.8 Bar Max\nOrifice: 25.0mm\nKv flow factor: 183 L/min based on water with 1 Bar pressure drop\nSeals: NBR standard, option EPDM, Viton and HNBR\nMedia: air, water, vacuum, oil, LPG, diesel, petrol, propane, inert gases, nitrogen, carbon dioxide, argon, oxygen, antifreeze, glycol, kerosene and other fluids under 50 CST and gases compatible with materials of construction.\nMedia temperature: NBR -15°C to +80°C, Viton -10°C to +180°C, HNBR -40°C to +150°C, EPDM -5°C to +130°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C and pressure 3 Bar Max.\nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\nHS Code 8481 8059.

313 in stock Model: PU22008

1 BSP Angle Seat Piston Valve 0-16 Bar 2/2 Normally Closed

1 inch Pneumatic angle body piston valve ASPV25SS\nFunction: 2/2 way normally closed with visual position indicator.\nOperation: 5 to 8 Bar compressed air pilot (1/8 BSP)\nPort: 1 BSP thread, option NPT or flange\nPressure 0 to 16 Bar (flow over seat) or 0 to 8 Bar (flow under seat offering anti water hammer)\nBody: 316 stainless steel\nInternals: 316 stainless steel\nSeals: PTFE, option FKM and NBR\nMedia: air, water, vacuum, steam, thick glutinous fluids up to 600 CST, corrosive acid and alkali\'s compatible with 316 stainless steel and PTFE.\nMedia Temperature: -10°C to +200°C Max \nAmbient temperature: +5°C to +60°C\nOrifice: 25.0mm\nKV: of 253 litres a minute based on water with 1 Bar pressure drop.\n\nActuator head: 304 stainless steel, option Polycarbonate\nActuator seals: FKM\nActuator size: 50mm\n\nOptions: \nOpen position proximity switch (PS)\nOpen and closed mechanical position feed back switches with LED (E2)\nModulating Controller LED Indication 4-20mA IP65 (M1)\nModulating Controller LED Screen 4-20mA ATEX IP66 (M2)

194 in stock Model: ASPV25SS

3/4 BSP Angle Seat Piston Valve 0-16 Bar 2/2 Normally Closed

3/4 inch Pneumatic angle body piston valve ASPV20SS\nFunction: 2/2 way normally closed with visual position indicator.\nOperation: 5 to 8 Bar compressed air pilot (1/8 BSP)\nPort: 3/4 BSP thread, option NPT or flange\nPressure 0 to 16 Bar (flow over seat) or 0 to 8 Bar (flow under seat offering anti water hammer)\nBody: 316 stainless steel\nInternals: 316 stainless steel\nSeals: PTFE, option FKM and NBR\nMedia: air, water, vacuum, steam, thick glutinous fluids up to 600 CST, corrosive acid and alkali\'s compatible with 316 stainless steel and PTFE.\nMedia Temperature: -10°C to +200°C Max \nAmbient temperature: +5°C to +60°C\nOrifice: 20mm\nKV: of 167 litres a minute based on water with 1 Bar pressure drop.\n\nActuator head: 304 stainless steel, option Polycarbonate\nActuator seals: FKM\nActuator size: 50mm\n\nOptions: \nOpen position proximity switch (PS)\nOpen and closed mechanical position feed back switches with LED (E2)\nModulating Controller LED Indication 4-20mA IP65 (M1)\nModulating Controller LED Screen 4-20mA ATEX IP66 (M2)

132 in stock Model: ASPV20SS

1/8 Stainless Solenoid Valve 0-150 Bar 2/2 N/Closed 1.2-5mm

1/8 inch Miniature stainless solenoid valve CS Fluid Power ADS6000.\nFunction: 2/2 way normally closed\nOperation: direct acting\nPort: 1/8 BSP standard, option NPT or Rc thread.\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: copper, option silver\nPressure: 0 to 150 Bar AC voltage, 0 to 105 Bar DC voltage (PTFE seals required for pressure above 30 Bar)\nTemperature: -10 to +180°C Max\nVacuum: Torr 10-6 Max\nOrifice: 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm or 5.0mm\nKv flow factor: 1 to 9.15 according to orifice, based on water with 1 Bar pressure drop.\nSeals: FKM, Option EPDM, NBR, Silicone, PTFE, VST, Neoprene, ECO, HNBR, Hypalon, Butyl IIR. PTFE must be used for pressure over 30 Bar.\nMedia: air, water, light oils, vacuum, and most other non corrosive fluids under 50CST and gases that are compatible with materials of construction.\nCoil: WPG1 12 watt UL, CSA, CE, IP67 Class H 100% duty rated DIN43650A\nCoil: WPG2 18 Watt UL, CSA, CE and IP67 Class H 100% duty rated\nCoil option: WPA3C 14.3 to 27.5 Watt (according to voltage) IP54 Class H with 30cm flying lead wires 100% duty rated.\nCoil option ADS60**: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 Pressure same as 12 Watt WPG1 coil\nVoltages: 12vDC, 24vDC, 48vDC or 24vAC, 48vAC, 110vAC or 230vAC.\nOther options: Manual Over Ride, Silver shading ring, degreased and other custom made options.

131 in stock Model: ADS6000