1/2" BSP or NPT PTFE solenoid valve 2/2 way normally closed with PTFE seals and PTFE diaphragm offers a pressure range AC 0 to 1 bar, DC 0 to 0.7 Bar and has a 6.5mm orifice giving a Kv flow factor of 4.7 litres a minute based on water with 1 bar pressure drop. The UDC15TF 1/2" inch threaded PTFE solenoid valve offers an isolating diaphragm design so that the media passing through this solenoid valve is only in contact with PTFE making it ideally suited for very corrosive and aggressive media such as strong acids and alkalis i.e. concentrated Hydrochloric Acid (HCL) and Sulphuric Acid (H2SO4).
The UDC15TF 0.5" half inch inch 2 way diaphragm solenoid valve is a favourite with chemical dosing, water dosing and chemical processing industries and is supplied with a WPA2 18 watt (24.2VA to 40VA) IP65 100% duty cycle DIN43650A coil and IP65 electrical connector as standard. Available voltages include 12vDC, 24vDC or 24vAC, 110vAc or 230vAc 50/60Hz, with special voltages available upon request.