Search Results

Search results for "22508"

1 Brass Solenoid Valve 0.5-15 Bar 2/2 Normally Open NOPU22508

1 inch normally open Brass solenoid valve Model NOPU225A-08 (PU225AN-08)\nFunction: 2/2 way normally open\nOperation: pressure assisted (requires 0.5 Bar min pressure differential)\nPressure: 0.5 to 10 Bar differential, Max working 15 Bar\nPort: 1 BSP, option NPT thread\nOrifice: 25.0mm\nKv flow factor: 165 L/min based on water with 1 Bar pressure drop\nBody: Brass\nInternals: Stainless steel\nSealing: NBR standard optional EPDM, Viton (FKM) or HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nTemperature: -15°C to +80°C with NBR seals, option Viton (FKM) -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nHS code 84818030

455 in stock Model: NOPU22508

1 Brass Solenoid Valve 0.5-15 Bar 2/2 Normally Closed PU225A-08 (ATEX option)

1 inch Brass solenoid valve Model PU225A-08 ®\nFunction: 2/2 way normally closed\nOperation: pressure assisted (requires 0.5 Bar min pressure differential)\nPressure: 0.5 to 10 Bar differential, Max working 15 Bar\nPort: 1 BSP, option NPT thread\nBody: Brass\nInternals: Stainless steel\nOrifice: 25.0 mm\nKv flow factor: 165 L/min based on water with 1 Bar pressure difference.\nSealing: NBR standard optional EPDM, Viton (FKM) or HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nOption: degreased, with all traces of oil and grease removed.\nTemperature: -15°C to +80°C with NBR seals, option Viton (FKM) -10°C to +180°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\nCoil option: 22003L Latching coil 6 to 12vDC, power pulse stays open, reverse polarity power pulse will stay closed.\nHS code 84818030

450 in stock Model: PU22508

1 water Irrigation Solenoid Valve 6-40vDC 2/2 latching 0.65-10 Bar

1 inch Water irrigation Solenoid Valve PN22508AL\nFunction: 2/2 way latching / bi-stable\nOperation: Pressure assisted (min 0.65 Bar pressure differential)\nPort: 1 BSP, option NPT thread.\nPressure: 0.65 Bar to 10 Bar (150 psi)\nBody: PA66 Glass Filled heavy duty Corrosion and UV resistant\nInternals: stainless steel\nSeals: NBR\nOrifice: 25mm\nKv flow factor: 7.7 cubic meters an hour based on 1 psi pressure drop.\nMedia temperature: +60°C Max (140°F). \nIncluded: Anti-water hammer design, flow controller, manual over ride and external bleed screw with removable metering pin for easy cleaning without disassembly of valve\nCoil: IP66 2.2 Watt with 30cm lead wires 100% duty rated.\nVoltages: Any 6 to 40vDC supply (Requires 4700μf capacitor) pulse 20 to 100 millisecond.\n\nThe PN22508AL latching function requires short electrical 6 volt to 40 volt DC pulse to stay open and then reverse polarity pulse to stay closed (swap +ve and -ve), repeat cycle for open and closed function. Requires 4700μf capacitor in circuit.\n\nIdeally suited for irrigation systems, underground water systems, agricultural sprinkler systems, landscaping and green house water systems.

167 in stock Model: PN22508AL

1 Water Irrigation Solenoid Valve 0.65-10 Bar 2/2 N/Closed PN22508

1 inch Water irrigation Solenoid Valve PN22508A\nFunction: 2/2 way Normally Closed\nOperation: Pressure assisted (min 0.65 Bar pressure differential)\nPort: 1 BSP or NPT thread\nPressure: 0.65 Bar to 10 Bar (150psi)\nBody: PA66 Glass Filled heavy duty Corrosion and UV resistant\nInternals: stainless steel\nSeals: NBR\nOrifice: 25.0mm\nKv flow factor: 126.9 L/min based water with 1 Bar pressure drop.\nMedia temperature: +60°C Max (140°F). \nIncluded: Anti-water hammer design, flow controller, manual over ride and external bleed screw with removable metering pin for easy cleaning without disassembly of valve\nCoil: IP66 12 Watt with 30cm lead wires 100% duty rated.\nVoltages: 12vDC, 24vDC, 24vAC, 110vAC or 230vAC 50/60Hz\n\nThe PN22508A is ideally suited for irrigation systems, underground water systems, agricultural sprinkler systems, landscaping and green house water systems.

113 in stock Model: PN22508A

1 Stainless Solenoid Valve 0.5-15 Bar 2/2 Normally Open

1 inch 316 stainless steel solenoid valve NOSPU225A-08 (SPU225AN-08)\nFunction: 2/2 way normally open\nOperation: pressure assisted, requires Min 0.5 Bar differential\nPort: 1 BSPP, option NPT or Rc thread.\nPressure: 0.5 to 10 Bar differential, 15 Bar max working\nBody: 316 stainless steel\nInternals: stainless steel\nShading ring: Copper, option without ring (DC only or AC with rectified DIN connector to DC) for demin water, RO water, pure water and Adblue.\nOrifice: 25.0mm\nKv flow factor: 165 L/min based on water with 1 Bar pressure drop\nSealing: Viton (FKM) standard optional EPDM, NBR or HNBR\nMedia: air, water, oil and other fluids under 50 CST and gases compatible with materials of construction.\nTemperature: -10°C to +180°C with Viton seals, option NBR -15°C to +80°C, EPDM -5°C to +130°C, HNBR -40°C to +150°C.\nCoil: 15 Watt Nass Magnet Class H CE IP65 approved 100% duty rated DIN43650A\nProtection: IP65 with connector (Included)\nCoil option: ATEX EExmIIT4 Temperature Class T4 T130°C Ex mb IIC T4 and Gb Ex mb tb IIIC T130°C Db for hazardous area 21 and 22 with max media temperature +80°C. \nVoltages: 12vDC, 24vDC, 48vDC, 110vDC, 220vDC or 12vAC, 24vAC, 36vAC, 48vAC, 110vAC, 230vAC or 380vAC 50/60hz.\n\nSPU225 solenoid valve is ATEX approved according to 94/9/EC certificate number Sira 09ATEX6180X, and also complies with essential health and safety requirements EN 13463-1:2001 and EN 1364-5:2003.\n\nHS code 84818030

84 in stock Model: NOSPU22508